Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Tarzana
If your fireplace has gone from a winter comfort to a source of smoke, a stuck damper or a pilot that won’t light, you’re in the right place. We repair fireplaces across Tarzana – gas and wood burning, inserts, dampers, fireboxes and pilot assemblies – and we treat every repair as a chimney problem first, because that’s where the danger usually lives. Our technicians have up to 12 years of experience, we only work on chimneys and fireplaces, and you get a written estimate before any repair begins. Call (866) 937-7635. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Tarzana Homeowners Call Brentwood Chimney Sweep for Fireplace Repair
Tarzana sits in the San Fernando Valley’s hot, smoggy basin at the mouth of the Santa Monica Mountains, and that setting shapes the work we do here. Fireplaces in this part of the Valley get used sparingly – mostly on cold winter nights and during the occasional holiday burn – but creosote and debris still accumulate over decades, and the dry heat cycling does its own quiet damage. That’s a different problem from what a heavily burned fireplace presents, and it takes someone who knows the local housing stock to catch it.
We’re a single-trade company. Chimney and fireplace work is the only thing we do, which means when we open up a firebox in Tarzana we’re not learning on your job. We carry the professional-grade products chimney specialists actually use – brands like DuraFlex, Olympia Chimney and Famco – and we can resurface a deteriorating flue with HeatShield rather than jump straight to a full reline. You see the camera evidence before anything is recommended, and if a repair can safely wait, we’ll tell you.
Response to Tarzana is straightforward: we book your visit, and dispatch runs from 7am to 7pm Sunday through Friday. We’re closed Saturday. Homes near the Santa Monica Mountains foothills and the flatter ranch streets off Reseda and Tampa alike get the same thorough inspection.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Tarzana
These are the four repairs we handle most in Tarzana, and they often overlap. A damper problem can look like a draft problem; a firebox crack can look like nothing until smoke starts backing up. That’s why every repair starts with a proper look, not a guess.
Wood Burning Fireplace Repair fireplace repair
Wood burning fireplaces are the backbone of older Tarzana ranch homes, and they’re the ones that tend to sit unused the longest. When a wood burner comes back into service after years idle, we check the firebox masonry, the damper, the smoke shelf and the flue liner before anyone lights a fire. Smoke rolling into the room usually traces to a warped damper plate or a cracked firebox, and both are fixable.

Gas Fireplace Repair
Newer homes and hillside estates around Tarzana often run gas fireplaces, and the usual complaints are a pilot that won’t stay lit, a weak flame, or a log set that won’t ignite. We diagnose the burner assembly, the gas valve and the safety shutoff, and we’re careful here – gas work is not a place for a DIY fix. If something needs a licensed gas fitter, we’ll say so plainly.

Fireplace Insert Service
An insert is only as good as the flue it vents into. We service inserts in Tarzana homes by pulling the unit, checking the liner connection, clearing the cap and confirming the draft pulls cleanly. Inserts installed decades ago often have liners that never matched the unit, which is a common cause of poor performance.

Damper Repair
Original dampers in mid-century masonry fireplaces seize or warp after years of occasional use, and the result is smoke spillage and heat loss even when the fireplace is closed. We repair or replace damper plates and their hinges so the fireplace seals when it should and opens freely when you want a fire.
Trusted Brands We Service in Tarzana
We source and install products from a curated set of professional-grade brands: DuraFlex liners, HeatShield flue resurfacing, Olympia Chimney components, Famco caps and tops, Gelco, and Copperfield. We don’t keep parts on trucks – repairs are quoted per job and materials are ordered for your fireplace, which means the right part for your flue rather than whatever’s on hand. That’s also how you get a clean turnaround: no guessing, no wrong-size caps. When a full reline isn’t necessary, HeatShield resurfacing lets us restore a deteriorating clay flue without tearing out the liner.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Tarzana Homes
Tarzana’s mid-century ranch fireplaces fail from heat cycling and wind-driven debris rather than heavy use. That’s the pattern here, and it’s worth understanding before you assume your fireplace is fine because you rarely burn.
- Cracked clay flue tiles. In 1950s-60s Tarzana ranch homes, the tiles crack from Valley heat cycling and Santa Ana wind-driven debris, not from fires – and those hidden gaps let creosote and smoke escape into the wall cavity. A camera inspection is the only way to see them.
- Seized or warped dampers. Original dampers in mid-century masonry fireplaces give out after decades of occasional use, causing smoke spillage and heat loss even when the fireplace is closed.
- Clogged chimney caps. Many Tarzana properties sit under mature tree canopy, so caps load up with leaves and bird nests. That debris has to be cleared before any repair can even be evaluated.
- Prefab chimney failures on hillside estates. Newer homes near the Santa Monica Mountains foothills have factory-built fireplaces whose chimneys develop loose flashing or a cracked crown, letting water in to rust the firebox.
Pricing for Fireplace Repair in Tarzana, CA
Fireplace repair is priced per job by the written estimate, and the estimate is free. Here are typical ranges for Tarzana’s market so you can plan:
| Repair | Typical Tarzana Range |
|---|---|
| Damper repair or replacement | $180 to $450 |
| Pilot light / gas burner diagnosis and repair | $150 to $400 |
| Firebox crack repair (masonry or HeatShield) | $400 to $1,200 |
| Chimney cap and debris clearing | $200 to $500 |
| Flue resurfacing (HeatShield) or partial reline | $1,500 to $4,000 |
What drives the number up or down is the condition of the flue and firebox, whether the cap needs to come off, and how much of the liner has degraded. You’ll see the camera footage and photo report before you decide. Call (866) 937-7635 for an exact quote. Estimates are free.
We Also Serve Cities Near Tarzana
We regularly work in neighboring communities around Tarzana, including Encino, Topanga, Sherman Oaks and Brentwood. If your fireplace is in one of these areas and you want the same camera inspection and written estimate, we’ll book you in. Call (866) 937-7635 and we’ll get you scheduled.
Serving Tarzana, CA – Our Local Coverage Area
We serve Tarzana and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Tarzana
Yes, you do – an unused fireplace can be the riskiest kind. In Tarzana’s 1950s-60s ranch homes, the clay flue tiles crack from Valley heat cycling and wind-driven debris even when the fireplace rarely gets lit, so a fireplace that’s been idle for years can hide gaps in the liner that let creosote and smoke escape into the wall cavity. NFPA 211 recommends an annual inspection for just this reason. Call (866) 937-7635 to book one. Estimates are free.
First-degree creosote is a thin, flaky soot that sweeps off easily; third-degree creosote is a hardened, glazed layer that’s much harder to remove and burns hotter. In Tarzana, where fireplaces are used sparingly, even light use over decades lets creosote build up without anyone noticing, and a glazed layer against a cracked tile is a fire hazard. If the glazing is severe, we may recommend HeatShield resurfacing or a reline. Call (866) 937-7635 for an inspection. Estimates are free.
Yes – a clogged cap blocks draft and can force smoke back into the room. Since many Tarzana properties sit under mature tree canopy, caps load up with leaves and bird nests, and that debris has to be cleared before any fireplace repair can even be properly evaluated. We clear the cap and inspect the flue in the same visit. Call (866) 937-7635 to book. Estimates are free.
Yes – we diagnose and repair gas fireplace ignition problems, from pilot assemblies to burner and gas valve issues. Gas work is not a DIY job, and we’re careful about what we touch; if a repair crosses into gas-fitting territory, we’ll tell you plainly. Call (866) 937-7635 to schedule a diagnosis. Estimates are free.
Usually, yes. A cracked crown on a factory-built chimney is a waterproofing and structural repair – we seal or rebuild the crown and check for loose flashing, which is what lets water in to rust the firebox and shortens the unit’s life. A crown repair is far less expensive than replacing the chimney, and it’s the first thing to fix. Call (866) 937-7635 for an inspection. Estimates are free.
If your fireplace in Tarzana is smoking, refusing to light, or just overdue for a look, don’t wait for the first cold night to find out what’s wrong. Call (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. From the firebox to the crown, every component inspected and serviced.
Written by the team at Brentwood Chimney Sweep.