Chimney Cap & Crown in Brentwood, CA | Brentwood Chimney Sweep

Chimney Cap & Crown in Brentwood - Measured On Site, One Written Price

Caps and crowns measured on your actual flue rather than fitted from a generic box, with one written price covering the part and the fitting.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Cap & Crown for Brentwood Homeowners

Most chimney water damage in Brentwood starts at the top. A missing cap lets rain straight down the flue, and a cracked crown lets water seep into the masonry around it, where it quietly rots the structure from the inside. By the time a homeowner notices a ceiling stain or a musty smell in the firebox, the damage has usually been working for a season or two. Our technicians have up to 12 years of experience installing, replacing and repairing caps and crowns, and we carry the professional-grade materials to do it right. We only do chimneys, so this work is our whole trade, not a side job. Call (866) 937-7635 and we’ll get a free estimate on the books, with same-day service available when the schedule allows.

Call (866) 937-7635

What Our Chimney Cap & Crown Service Includes

Caps and crowns are two different parts of the chimney top, and both fail in their own way. A cap keeps rain, birds and debris out of the flue. A crown is the sloped concrete or masonry surface at the very top that sheds water away from the chimney body. We handle both, plus the variants that come up on Brentwood roofs.

Cap Installation

A cap is a cover that sits over the flue opening on legs or a mesh base, letting smoke out while keeping weather and animals in check. You need one if your flue is open to the sky, which is common on older Brentwood homes where the original cap rusted away or was never fitted. We measure the flue, match the cap style to your fireplace type and install it so it seals tightly without blocking draft.

Cap Installation

Cap Replacement

Caps don’t last forever. Galvanized models rust through, mesh screens tear, and wind can bend a cap out of shape until it no longer sits flat. If yours is rattling, rusted or missing chunks of screen, replacement is usually the right call rather than a patch. We remove the old cap, inspect the flue top while we’re up there and fit a new one sized to your chimney.

Cap Replacement

Crown Repair

The crown is the concrete cap on top of the masonry itself, and it’s where a lot of water damage begins. Hairline cracks let water in, and in a mild Brentwood winter that moisture works into the brick and mortar instead of draining away. We repair cracks and rebuild failing crowns with a proper slope so water runs off the way it should.

Crown Repair

Crown Coating

Crown coating is a protective layer applied over a sound but weathered crown to seal small cracks and stop them spreading. It’s a good option when the crown is structurally intact but showing surface wear, and it saves the cost of a full rebuild. We prep the surface properly first, because a coating over dirt or loose material won’t hold. Using a flexible coating from a brand like Copperfield, we give the crown a watertight skin that moves with the masonry.

Multi-Flue Cap

Some Brentwood chimneys serve more than one flue, whether from a fireplace plus a furnace or a home with two fireplaces sharing a stack. A multi-flue cap covers the whole top in one unit, which looks cleaner and protects each opening at once. We build these to fit the exact footprint of your chimney so there are no gaps at the edges.

Custom Cap

Not every chimney is a standard size, and a cap that doesn’t fit properly is as bad as no cap at all. Custom caps are made to measure for oversized flues, unusual shapes or chimneys where a stock unit won’t seal. We take the measurements on site and have the cap fabricated to match, then install it so it sits level and locks down against wind.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 937-7635

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Brands We Service for Chimney Cap & Crown

We work with professional-grade products from brands that chimney specialists actually use, and that knowledge shapes how we repair and install. Famco caps and components are a common sight on Brentwood roofs, and we know how their mounting systems wear and where the weak points show up after a few seasons of sun and rain. DuraFlex products come into play when a cap or crown issue connects to the liner below, and we understand how those pieces fit together so the top of the chimney and the flue work as one system. Copperfield coatings are part of how we protect crowns that are sound but showing their age.

HeatShield is a name we rely on when a crown problem turns out to be a flue problem underneath. The HeatShield system lets us resurface a deteriorating flue liner without a full reline, which saves money when the liner is still structurally repairable. Knowing which of these products suits a given chimney is part of the job, and it’s why we don’t hand this work to a generalist. Whether you have Famco, Copperfield, DuraFlex, HeatShield or any other make, we can help.

Signs You Need Chimney Cap & Crown Right Now

  • Water in the firebox after rain. If you find dampness, rust stains or a musty smell inside the fireplace after a storm, the cap or crown is likely letting water in. Left alone, that moisture reaches the damper and the liner.
  • Cracks or crumbling on the crown. Visible cracks, flaking concrete or a crown that’s pulling away from the flue are clear signals it’s failing. Small cracks widen with each wet season, so catching them early keeps the repair small.
  • A missing, loose or rusted cap. A cap that’s blown loose, rusted through or gone altogether leaves the flue open to rain, birds and debris. That’s a straightforward fix that prevents bigger problems.
  • Birds, squirrels or debris in the flue. Nesting animals and leaves block the flue and create a fire and carbon monoxide risk. A proper cap with intact mesh keeps them out.
  • Staining on the chimney exterior or ceiling. White efflorescence on the brick or a water stain on a nearby ceiling means moisture is getting into the masonry from above. The crown is one of the first places we check.

Our Chimney Cap & Crown Process – Step by Step

  1. 1
    Inspection first. Before we quote anything, we look at the whole chimney top and the flue below it. We check the crown for cracks, the cap for wear and the flashing where the chimney meets the roof, because a leak isn’t always where it looks.
  2. 2
    Camera check of the flue. A camera inspection tells us whether water has already reached the liner. This matters because a crown repair on top of a damaged liner only hides the problem. We include a photo report so you can see exactly what we found.
  3. 3
    Written estimate. We put the scope and the flat price in writing before any work starts, so there are no surprises. If something can safely wait, we say so.
  4. 4
    The repair or install. We remove the old cap or repair the crown, prep the surface properly and install the new component with the right materials for your chimney. Crown work gets a proper slope so water drains away from the flue.
  5. 5
    Final check and walkthrough. We confirm the cap is secure and the crown sheds water, then walk you through what we did and what to watch for. You get the photos and a clear record of the work.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 937-7635

How Much Does Chimney Cap & Crown Cost in Brentwood?

Cap and crown work in Brentwood generally runs from a modest repair to a full rebuild depending on what we find. These are typical estimates, and the written estimate sets the final price.

Service Typical Estimated Range
Cap installation (standard single-flue) $150 – $400
Cap replacement $175 – $450
Multi-flue or custom cap $300 – $800
Crown coating $250 – $600
Crown repair $350 – $900
Full crown rebuild $600 – $1,500

What moves the price is the size of the chimney, how many flues it serves, whether the cap is a stock size or custom, and how much of the crown needs rebuilding versus coating. Access matters too; a steep or high roof takes more care. The best way to avoid overpaying is to get a written scope that separates the cap from the crown, so you’re not paying for a rebuild when a coating would do. Our free estimate includes the camera inspection and a photo report, so you can see the evidence before you agree to anything. If a repair can wait a season, we’ll tell you.

Chimney Cap & Crown Near Brentwood – Our Service Area

We serve Brentwood and the neighborhoods around it, and we regularly work in Westwood, Pacific Palisades, Santa Monica, Beverly Hills, Venice, Mar Vista, West Hollywood, Culver City, Sherman Oaks, Marina del Rey and Encino. Response times depend on the schedule and the distance, and we’ll give you a realistic window when you call. If you’re comparing options across the area, our chimney cap & crown page covers the Westwood side, and the chimney cap & crown page covers Pacific Palisades.

Serving Brentwood, CA – Our Local Coverage Area

We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Chimney Cap & Crown in Brentwood

Schedule Your Chimney Cap & Crown Service in Brentwood Today

A cap and a sound crown are the simplest protection your chimney has, and fixing them early saves the liner and the masonry below. Our technicians bring professional-grade materials and a written estimate you can trust, backed by a satisfaction guarantee. Call (866) 937-7635 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also start with a Brentwood Chimney Sweep inspection or a full chimney cap & crown review.

Written by the team at Brentwood Chimney Sweep.

Why Brentwood Chooses Brentwood Chimney Sweep

We set the standard for chimney cap & crown in Brentwood.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Brentwood

Getting your chimney cap & crown project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cap & crown project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

The local pro we connect you with does the work on the date in your quote, backed by a workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cap & crown pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Brentwood Customers Say

Trusted by homeowners across Brentwood and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Rohan Patel
★★★★★

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

Alma Reyes
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Marisol Delgado

Ready for Chimney Cap & Crown in Brentwood?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and ready to schedule your free estimate in Brentwood.

(866) 937-7635

Request a Free Estimate in Brentwood

Tell us about your chimney cap & crown needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Chimney Sweep BrentwoodChimney Sweep WestwoodChimney Sweep Pacific PalisadesChimney Sweep Santa MonicaChimney Sweep Beverly HillsChimney Sweep VeniceChimney Sweep Mar VistaChimney Sweep West HollywoodChimney Sweep Culver CityChimney Sweep Sherman OaksChimney Sweep Marina del ReyChimney Sweep EncinoChimney Sweep Studio CityChimney Sweep Ladera HeightsChimney Sweep TopangaChimney Sweep TarzanaChimney Cap & Crown BrentwoodChimney Cap & Crown WestwoodChimney Cap & Crown Pacific PalisadesChimney Cap & Crown Santa MonicaChimney Cap & Crown Beverly HillsChimney Cap & Crown VeniceChimney Cap & Crown Mar VistaChimney Cap & Crown West HollywoodChimney Cap & Crown Culver CityChimney Cap & Crown Sherman OaksChimney Cap & Crown Marina del ReyChimney Cap & Crown EncinoChimney Cap & Crown Studio CityChimney Cap & Crown Ladera HeightsChimney Cap & Crown TopangaChimney Cap & Crown TarzanaFireplace Repair BrentwoodFireplace Repair WestwoodFireplace Repair Pacific PalisadesFireplace Repair Santa MonicaFireplace Repair Beverly HillsFireplace Repair VeniceFireplace Repair Mar VistaFireplace Repair West HollywoodFireplace Repair Culver CityFireplace Repair Sherman OaksFireplace Repair Marina del ReyFireplace Repair EncinoFireplace Repair Studio CityFireplace Repair Ladera HeightsFireplace Repair TopangaFireplace Repair TarzanaChimney Repair BrentwoodChimney Repair WestwoodChimney Repair Pacific PalisadesChimney Repair Santa MonicaChimney Repair Beverly HillsChimney Repair VeniceChimney Repair Mar VistaChimney Repair West HollywoodChimney Repair Culver CityChimney Repair Sherman OaksChimney Repair Marina del ReyChimney Repair EncinoChimney Repair Studio CityChimney Repair Ladera HeightsChimney Repair TopangaChimney Repair TarzanaChimney Inspection BrentwoodChimney Inspection WestwoodChimney Inspection Pacific PalisadesChimney Inspection Santa MonicaChimney Inspection Beverly HillsChimney Inspection VeniceChimney Inspection Mar VistaChimney Inspection West HollywoodChimney Inspection Culver CityChimney Inspection Sherman OaksChimney Inspection Marina del ReyChimney Inspection EncinoChimney Inspection Studio CityChimney Inspection Ladera HeightsChimney Inspection TopangaChimney Inspection Tarzana
Call Now - We Answer 24/7