Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across West Hollywood
A chimney cap and crown are the two pieces of your chimney that take the weather so the rest of it doesn’t have to. In West Hollywood, where so much of the housing is older brick and stucco, those two pieces fail faster than most homeowners expect. We handle cap installation, cap replacement, crown repair, and crown coating for West Hollywood properties, and we know what dense, attached housing does to a chimney that one house on its own would never see. The work here is close quarters: tight roofs, shared stacks, and neighbors whose appliances vent into the same flue you do. Call (866) 937-7635 to set up an estimate. We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday.
Why West Hollywood Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
Chimney work is the only trade we practice. That matters in a city where a bad cap affects more than one household, because we’re not splitting our attention between roofing and HVAC and chimneys. Our technicians have up to 12 years of experience, and they work with professional-grade materials from brands chimney specialists actually use, like Copperfield and DuraFlex, rather than generic parts that fit one stack and not the next.
West Hollywood homeowners and small building owners call us because we deal plainly with the tight-access problem. Getting a technician onto a roof above a Fountain or La Jolla apartment building is a different job than a suburban bungalow, and we plan for it. Every job starts with a written estimate and a flat price agreed before we book, so the number you’re quoted is the number you’re asked to approve. Nothing is recommended without a camera inspection and a photo report you can look at yourself. The local professionals we connect you with are licensed and insured as the state requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in West Hollywood
This page is built for the very real reality of West Hollywood housing: shared flues, attached buildings, and original masonry that can’t be altered without checking with the city first. Here’s what we do.
Multi-Flue Cap
Most West Hollywood buildings don’t have one flue. They have a stack of clay tiles serving several fireplaces and gas appliances at once, which is why a custom multi-flue cap is usually the right call rather than a single-flue cap that only covers part of the crown. We measure the whole stack and fit a cap sized to it, from brands like Famco or Copperfield, so the entire top is sealed against rain and animals. On a shared stack, an undersized cap leaves gaps, breaks draft, and lets marine-layer moisture straight into the tiles below.

Cap Installation
New cap installation on a West Hollywood home means fitting the cap to the actual crown and flue arrangement, not to whatever the box said. In the Norma Triangle and Doheny single-family pockets, a single-flue cap over a standard clay tile is straightforward. On a Mid-Century stucco building with several flues, it’s a custom job. Either way, the cap needs to shed water off the sides and stay put in wind while still letting smoke and gas out.

Crown Repair
The crown is the mortar cap on top of the chimney that pushes rain away from the brick. In West Hollywood, that crown is often original to a 1920s Spanish Colonial building, and it’s been spalling and cracking for a while. When the crown no longer seals the top, water gets down into the flue tiles and the shared stack, which is where cross-contamination between units starts to happen. We rebuild and reshape the crown so it drains properly.

Crown Coating
Crown coating is a flexible protective layer applied over a crown that’s still structurally sound but worn on the surface. It’s the repair we reach for on Mid-Century stucco buildings where the crown isn’t collapsing yet but the marine-layer moisture is chewing into the mortar. Coating seals the surface and slows the spalling without the cost and disruption of a full crown rebuild. HeatShield products fit this kind of targeted repair well. If a crown is too far gone to coat, we’ll tell you that plainly and show you why.
Trusted Brands We Service in West Hollywood
We install and work with a focused set of professional-grade chimney brands: Famco, Copperfield, DuraFlex, and HeatShield. We don’t stock parts or keep a warehouse, but because these are the materials we know and source for every job, we can usually fit a West Hollywood cap or crown job together without a long wait on odd parts. HeatShield matters here especially, since it’s a proprietary flue resurfacing system that requires real product knowledge and application skill, and it lets us fix a deteriorating liner without going straight to a full reline. That keeps a shared-stack repair within reach for a building owner who doesn’t want to redo the whole chimney.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in West Hollywood Homes
- Cracked clay tiles in shared stacks. Flue gases from one unit’s gas appliance can migrate through cracked tiles into a neighboring firebox. Original mortar crowns that have spalled stop sealing the top, which is when the migration gets worse.
- Undersized single-flue caps on 1920s Spanish Colonial buildings. A cap sized for one tile can’t cover the several flue tiles now serving multiple gas appliances. The gaps let rain and animals in and undermine draft.
- Spalling brick and crumbling mortar crowns on Mid-Century stucco buildings. Marine-layer moisture soaks into the mortar and brick, and the damage often goes unnoticed until a debris blockage shows up or a Level 2 inspection catches it during a real estate transaction.
- Dry-climate neglect. West Hollywood’s mild, dry climate means little creosote buildup from wood burning, so moisture intrusion and flue-cap condition are a bigger part of the job than sweeping. The cap and crown are where the damage usually is.
Pricing for Chimney Cap & Crown in West Hollywood, CA
Here are the typical ranges for West Hollywood. A standard single-flue cap installation usually runs $250 to $550. A custom multi-flue cap for a shared stack typically costs $650 to $1,500, depending on how many flues it covers. Crown repair generally runs $450 to $900, and crown coating is usually $350 to $650. What moves a number in West Hollywood is access: a roof over a Fountain or La Jolla apartment building with several tenants to coordinate can take more setup than a bungalow in the Norma Triangle. The written estimate sets the final price, and the estimate itself is free. Call (866) 937-7635 for an exact quote.
We Also Serve Cities Near West Hollywood
Our Chimney Cap & Crown work reaches out past the city line to Beverly Hills, Studio City, Westwood, and Culver City. Each of those areas has its own housing pattern and its own chimney quirks, but the cap and crown fundamentals stay the same. If you live in West Hollywood or just over the boundary, get in touch and we’ll take a look at the whole top of the chimney.
Serving West Hollywood, CA – Our Local Coverage Area
We serve West Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in West Hollywood
No, and here’s why: capping only your own flue on a shared stack doesn’t fix the top, it can upset draft for the other units, and it leaves the crown and the gaps between tiles exposed. A building with a shared stack needs a multi-flue cap sized for the whole assembly, which means the property owner and neighboring tenants are part of the conversation. We coordinate that access as part of the job. Call (866) 937-7635 to talk through your building.
You need a Level 2 inspection. When a property changes hands, a camera inspection that goes up the flue and documents its condition is what buyers and their agents expect, and it’s what we provide, with a photo report you can hand over. On older Spanish Colonial masonry it often turns up spalling mortar and cap issues that never showed up during regular use. Call (866) 937-7635 to book it.
The crumbling isn’t from fire, it’s from moisture. West Hollywood’s marine layer and winter rains soak into the mortar crown, and when the surface spalls and cracks, the damage feeds itself with each wet season. Crown coating on a sound crown slows that; a rebuild is needed once it’s too far gone. Neither requires wood burning to fail. Call (866) 937-7635 and we’ll tell you which one your crown needs.
Sometimes, but a cap alone won’t fix cross-contamination from a shared flue. The odor usually means cracked tiles are letting one unit’s exhaust migrate into another’s firebox, and a proper fix starts with a camera inspection to confirm it. Once we see the inside of the stack, we know whether a multi-flue cap, crown repair, or a HeatShield liner repair is the right answer. Call (866) 937-7635 for an exact quote – estimates are free.
Creosote builds up in stages: first-degree is a light flaky layer, third-degree is a hard, glazed crust that’s much harder to remove and is the stage that raises fire risk. In West Hollywood it usually shows up as light first-degree buildup, because wood burning is uncommon in the dense apartment stock and many fireplaces run on gas or are sealed. It still matters for any active wood-burning fireplace, and we check it on every sweep. Call (866) 937-7635 to schedule a cleaning and inspection.
If your West Hollywood chimney needs a cap, a crown repair, or a closer look at a shared stack, call us at (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.