Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Beverly Hills
Chimney repair in Beverly Hills usually means masonry work on a house that has more than one fireplace. Our technicians have up to 12 years of experience with the original clay tile liners, worn mortar crowns and custom brickwork this city is full of, and we treat every repair as a preservation job first. From the flats around 90212 up through the hillside estates, we know what fails here and why: water and animal debris more often than heavy creosote. Call (866) 937-7635 and we’ll book a sweep or an inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Hills Homeowners Call Brentwood Chimney Sweep for Chimney Repair
We’re a chimney-only company. Every technician we connect you with works on chimneys and fireplaces and nothing else, which matters when the chimney sits on a 1930s Spanish Colonial with hand-set brick and a terra-cotta liner that can’t take rough handling. That single-trade focus is the reason property managers and estate owners around Beverly Hills keep our number.
Our vetted local professionals are licensed and insured as their state requires. Every repair starts with a free written estimate, and a flat-price sweep is agreed before booking, so you know the number before anyone climbs up. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can wait.
Because we only do chimneys, we carry the full scope: inspection, sweep, cap and crown, fireplace repair and structural chimney repair. You won’t need a second contractor to finish the job. That’s a real advantage on a Beverly Hills property where the crown, the flashing and four flues all need attention at once.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Beverly Hills
Mortar Repointing
Repointing is the most common repair we quote on older Beverly Hills brick. The mortar between courses weathers out before the brick does, and on original estates the joints often need matching in color and tooling so the repair disappears into the wall. We rake out the failed mortar, pack fresh joints and match the profile carefully. It’s slow work, and it’s the right work for aged masonry.
Spalling Brick Repair
Spalling is when the face of a brick flakes off, usually because water got in and the brick couldn’t dry out. In Beverly Hills the culprit is typically a worn crown and no waterproofing rather than freeze damage, and the repair means replacing the damaged units with matched brick and rebuilding the bond. Catching it early keeps the repair small. Leave it and the damage creeps toward the shoulder of the chimney.
Chimney Waterproofing
Water is the leading cause of chimney damage, and it does more harm here than most people expect because the fireplaces see so little use that nobody notices the slow decay. We apply a breathable waterproofing to the masonry so water sheds off while the brick still lets vapor out. Paired with a sound crown, it’s the single best thing you can do for an estate chimney that sits idle most of the year.
Flashing Repair
Flashing is the metal at the roof line that keeps water from running between the chimney and the roof. On Beverly Hills homes, flashing gets lifted by roof movement and older lead flashing cracks with age, letting water down into the attic and the ceiling below. We reset and seal the flashing, then camera-inspect inside to check whether any water has reached the framing. Fixing flashing early stops the leak and the rot that follows.
Trusted Brands We Service in Beverly Hills
We install and repair with professional-grade materials from brands chimney specialists actually use: Famco for venting and masonry components, DuraFlex for stainless liners on the older tile flues common around Beverly Hills, and Copperfield for caps and crown hardware. We also offer HeatShield flue resurfacing, which repairs a deteriorating liner without a full replacement (more on whether you actually need one below). We don’t claim to stock a warehouse. Materials are specified to the job and turned around quickly. That means the liner or cap that fits your flue is chosen after inspection, not pulled off a shelf and made to work.
Common Chimney Repair Problems We See in Beverly Hills Homes
Beverly Hills chimney damage is a preservation problem as much as a safety one. Here’s what we find most often.
- Cracked and spalling original clay flue tiles. Decades of wet-dry cycling under a deteriorated mortar crown widen hairline cracks until the tile starts flaking into the firebox. On decorative fireplaces it goes unnoticed for years.
- Palm frond debris and mud dauber nests in idle flues. In the hillside sections these are a recurring discovery. Flues that haven’t been burned in years get packed with nesting material and debris, which restricts draft and hides itself until an inspection.
- Gas-converted fireboxes with mismatched liners. Inserts and gas logs are often installed without matching the flue liner and damper to the new appliance, leaving the smoke chamber and original liner unmaintained.
- Worn mortar crowns and lifted flashing. The crown is where water gets in and the flashing is where it follows. Both fail slowly, and both are inexpensive to repair before the damage spreads into the structure.
Why a Beverly Hills Estate Is a Multi-Flue Inspection Problem
This is where Beverly Hills differs from almost anywhere else in the region. A single estate here routinely has four to eight separate fireplaces, and under NFPA 211 each flue counts as its own inspection item. So a “sweep” on a hillside property is really a documented multi-flue survey, not a one-chimney visit. Some flues belong to wood-burning fireplaces, some were never converted, and some now feed gas appliances whose liners and dampers were never matched to the change.
The other thing we find is that the hillside sections don’t have a creosote problem so much as a debris problem. Palm frond material and mud dauber nests pack the flues during long idle stretches, and that’s what blocks draft. Since fires here are occasional, buildup is slow. The failure is nearly always water and animals, not third-degree creosote. That’s why we inspect, document and show you photos before we recommend repair, and why it’s honest to tell you when a flue can safely wait.
A typical job on one of the 1920s-1950s Spanish Colonial or Tudor estates goes like this: an unused decorative fireplace has a worn mortar crown letting water into original clay flue tiles, and the tile is beginning to spall into the firebox. A qualified pro runs a Level 2 camera inspection, documents the liner and smoke chamber, repoints the crown, repairs or relines with HeatShield or a DuraFlex liner, and re-checks the damper. Protective drop cloths stay down throughout because the interiors are custom.
See the difference
Before
After
Before
After
Before
AfterWhat Actually Happens If You Skip It
Liner cracks let heat and embers reach combustible framing, and a blocked or undersized flue pushes carbon monoxide back into the room. That’s the real reason the inspection matters on a house with several appliances. We won’t overstate it. Plenty of chimneys get three or four more years of light use with only minor work. But a spalling liner, a clogged flue or a gas appliance venting wrong is a genuine hazard, and camera photos settle the question without guesswork. Call (866) 937-7635 for a free estimate.
Pricing for Chimney Repair in Beverly Hills, CA
Repairs are quoted per job from what the inspection finds, and the written estimate sets the final price. To give you a realistic picture of the Beverly Hills market, here are typical ranges:
| Repair | Typical range |
|---|---|
| Mortar repointing (partial crown or shoulder) | $350 – $900 |
| Chimney crown rebuild and waterproofing | $500 – $1,500 |
| Spalling brick repair (per area) | $400 – $1,200 |
| Flashing repair or reset | $300 – $800 |
| HeatShield flue resurfacing | $1,200 – $2,800 |
| DuraFlex stainless liner for a single flue | $2,000 – $4,500 |
Multiple flues, matched-brick work and custom interiors move the number, and a full chimney rebuild sits at the top of the range. The estimate is free, and we include a camera inspection and photo report so you can see what we see.
We Also Serve Cities Near Beverly Hills
Our chimney repair team covers the neighboring cities too, including West Hollywood, Westwood, Culver City and Brentwood. The same housing stock and the same dry climate apply across most of them, so the repair approach carries over well. We’re glad to work throughout Beverly Hills and the surrounding area. If you’re just outside the city line, ask when you call and we’ll let you know.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Beverly Hills
No. Third-degree creosote has bonded into a hard, glazed layer that a standard brush won’t remove, and it needs chemical treatment or the flue liner replaced. The good news is that most Beverly Hills chimneys we inspect don’t have third-degree creosote, because fireplaces here see light and occasional use; the real problems are water damage and palm or mud dauber debris. A camera inspection tells you which one you’re dealing with. Call (866) 937-7635 and we’ll book one. Estimates are free.
We book Beverly Hills visits into our next available opening, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday, so a call over the weekend is booked into the next opening. We answer the phone 24/7. For a property with several flues, allow enough time for a documented survey rather than a quick sweep. Call (866) 937-7635 to find your slot.
Yes. We cover the flats and the hillside streets, from the condos and older homes around 90212 up through the estate properties with multiple fireplaces. Wherever the chimney is, we’ll inspect it and write up what we find. Call (866) 937-7635 to confirm the address and book.
Same-day service is possible for smaller repairs when the schedule allows, but larger masonry and liner jobs are booked after the inspection. The right sequence is inspect, quote, then repair, because a crown or liner repair should match what’s actually failing. Our technicians have up to 12 years of experience and won’t guess. Call (866) 937-7635 for a free estimate.
Roughly the same. Beverly Hills repair pricing runs close to West Hollywood and Brentwood because the labor and materials are the same, with two exceptions: matched-brick restoration on older estates and multi-flue work push the total up. The written estimate you get is the price, and it’s free. Call (866) 937-7635 and we’ll put the numbers in writing.
Yes. Repairs are backed by a satisfaction guarantee, and the local pro who performs the work stands behind it. We specify professional-grade materials, including DuraFlex liners and HeatShield resurfacing where they’re the right fit, so the repair is built to last. If something isn’t right, tell us. Call (866) 937-7635 to book.
Book Your Beverly Hills Chimney Repair
Whether it’s one chimney crown or six flues across an estate, we’ll inspect, document and repair it with materials suited to the house. Ready to get a free estimate? Call (866) 937-7635. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.