Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Beverly Hills
A missing or cracked chimney cap and a failing crown are the two most common ways water gets into a Beverly Hills chimney. Caps keep rain, birds and debris out of the flue; crowns shed water off the top of the brick. When either one is compromised, the damage shows up later as spalling brick and a soaked liner. We handle chimney cap & crown work across Beverly Hills, from the flats near 90212 up into the hillside streets, and we know how much of this work here is about protecting an architectural feature rather than chasing a heat source. Call (866) 937-7635 and we’ll book a sweep and inspection before the next burning season.
Why Beverly Hills Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
Beverly Hills chimney work is almost entirely driven by luxury estate and hillside homes where fireplaces are architectural features, often original or decorative, rather than primary heat sources. That changes the job. It’s as much about cosmetic preservation, custom masonry and careful flue care as it is about creosote removal. A homeowner on one of the hillside streets of 90210 is protecting a 1920s Spanish Colonial fireplace surround. A property manager in the flats is documenting condition for an owner who lives elsewhere. We work with both the same way: inspection first, camera evidence you can see for yourself, and a written scope before anyone touches the chimney.
Our technicians have up to 12 years of experience, and that experience is chimney-only. We connect Beverly Hills homeowners with vetted local professionals who are licensed and insured as their state requires, and we never recommend liner or masonry work without photo documentation you can look at. Larger estates here usually have several flues serving several fireplaces, and the honest answer is often that only one of them needs attention now. We’ll tell you which parts can safely wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Beverly Hills
Cap Installation
A properly fitted cap keeps rain, birds, palm frond debris and mud daubers out of the flue. On Beverly Hills homes with gas-converted fireplaces, the cap also keeps nesting material from blocking what little exhaust the flue carries. We size the cap to the actual flue opening, not a generic hardware-store fit.

Cap Replacement
Older caps rust through at the seams, warp out of level or lose their screens. On a Beverly Hills estate where the cap has to sit atop a decorative chimney breast, the replacement has to match the footprint and read cleanly from the ground. We can work with Olympia Chimney and Copperfield components to get that fit right.

Crown Repair
The mortar crown is the concrete or mortar cap that sheds water off the top of the brick. When it cracks on a 1920s – 1950s Spanish Colonial or Tudor chimney, water works down into the brick and the clay tiles below. Crown repair rebuilds that shedding slope so water runs off instead of soaking in.

Crown Coating
For a crown that’s cracked but structurally sound, a flexible coating seals the surface and bridges small cracks before they widen. This is the option we reach for when the underlying crown is still holding, and it’s usually less intrusive than a full rebuild on a heritage chimney.
Trusted Brands We Service in Beverly Hills
We source and install professional-grade chimney products from names working chimney specialists actually use, including Olympia Chimney, Famco, Copperfield and DuraFlex. That matters on Beverly Hills estates where a cap, crown or flue component has to fit an original chimney rather than a stock opening. We don’t claim to stock parts; we source what the job needs and confirm the fit against your chimney’s actual dimensions before installing. The point isn’t the brand name by itself. It’s that the component is rated for the flue it serves and won’t fail in two winters.
Common Chimney Cap & Crown Problems We See in Beverly Hills Homes
- Cracked mortar crowns on older estate chimneys. On 1920s – 1950s Spanish Colonial and Tudor chimneys, the crown cracks from age and thermal cycling, letting water reach the brick and liner below. Left alone, that water causes spalling brick and a deteriorated flue liner.
- Fragile original clay tile liners. Many Beverly Hills estates still have their original clay tiles, which are fragile and easily damaged by aggressive cleaning. When third-degree creosote glazing is present, the cleaning has to be slow and non-destructive rather than fast and forceful.
- Mud dauber nests and palm frond debris in hillside 90210 flues. Hillside properties here routinely collect both, and a clogged flue restricts draft and creates a fire hazard when the fireplace is finally used after long idle periods. A cap with a proper screen is the fix, but the flue has to be cleared first.
- Caps that were never sized to the chimney. A generic cap on a decorative chimney breast looks wrong and often sits loose. On a Beverly Hills home where the roofline is visible from the street, a custom cap sized to the footprint is the only fit that holds and reads correctly.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Beverly Hills, CA
Beverly Hills sits at the higher end of the local chimney market, and the ranges below reflect that. These are typical estimates for the work, and the written estimate from your inspection sets the final price.
- Standard single-flue cap installation: typically $250 – $500
- Custom or multi-flue cap sized to the chimney: typically $600 – $1,500
- Crown repair or rebuild: typically $400 – $900
- Flexible crown coating: typically $300 – $600
What moves the number: the number of flues, the chimney’s footprint and masonry detail, how much crown has to be rebuilt versus coated, and access on a steep or hillside roofline. The estimate is free. You’ll get camera inspection and a photo report included, so you can see the crack or the debris before you agree to anything. Nothing gets recommended without that evidence in front of you.
We Also Serve Cities Near Beverly Hills
We work across Beverly Hills and the surrounding area, including West Hollywood, Westwood, Culver City and Brentwood. The same inspection-first approach applies whether your chimney sits on a hillside estate or a flat-roof home in the flats. If you’re just outside the city line, call and we’ll confirm coverage for your address.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Beverly Hills
Yes, every flue needs its own cap, gas and wood-burning alike. A gas flue still lets birds, mud daubers and palm frond debris in, and a blocked gas flue is a carbon monoxide concern. For a multi-fireplace Beverly Hills estate, a multi-flue cap sized to the chimney footprint often looks cleaner and costs less than several separate caps. Call (866) 937-7635 for an exact quote – estimates are free.
Once a year is the right interval, and inspecting before burning season matters more than the month. Our warm, dry climate means fireplaces see light, occasional use, so creosote builds slowly, but long idle periods are when debris and nests accumulate and crowns crack from thermal cycling. An annual check catches a cracked crown before water reaches the brick. Call (866) 937-7635 to book the inspection.
For a sound crown with surface cracks, a flexible coating is the least intrusive option and the one we prefer on a heritage chimney with original clay tiles. Where the crown is broken through or has lost its slope, it needs a rebuild so it sheds water again. The deciding factor is the camera evidence, not the age of the house. Call (866) 937-7635 and we’ll show you which one your crown needs.
Yes. A custom cap is sized and detailed to the actual footprint and roofline, so it reads as part of the chimney rather than an add-on. On a Spanish Colonial or Tudor estate where the chimney is visible from the street, that fit is worth doing right. We size against your chimney’s measurements and source components rated for the flue. Call (866) 937-7635 for a free estimate.
Get the flue cleared and inspected before you light a fire. Mud dauber nests and palm frond debris are a recurring find in hillside 90210 flues, and they restrict draft and create a fire hazard. Don’t burn until the flue is clear and the cap is screened and fitted. Call (866) 937-7635 to book a sweep and inspection.
Beverly Hills sits toward the higher end of the local chimney market because of the housing stock itself – multi-flue estates, custom caps and heritage crowns take more time than a single flue in the flats. The ranges above reflect that, and the written estimate sets the final price for your chimney. Call (866) 937-7635 for an exact quote – estimates are free.
Book Your Beverly Hills Cap & Crown Inspection
If your chimney is over a hundred years old in the hillside streets of 90210, or it’s a newer custom mansion with a decorative flue, the cap and crown are what keep water and debris from doing damage. We’ll inspect, document it with photos, and tell you plainly what needs fixing now and what can wait. Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.