Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Beverly Hills
Chimney inspection in Beverly Hills is different from inspection almost anywhere else in the region. Most of the fireplaces we’re asked to look at here are decorative, gas-converted or original to an estate built between the 1920s and the 1950s, and many burn a handful of times a year. That changes what an inspection is for: documenting the condition of aged clay flue tiles, worn mortar crowns and custom masonry so owners and property managers know exactly what they have. We handle these properties across Beverly Hills, from the flats of 90212 to the hillside estates above Sunset. Call (866) 937-7635 to book; we answer 24/7.
Why Beverly Hills Homeowners Call Brentwood Chimney Sweep for Chimney Inspection
A house with four fireplaces and three flues is not a house with one chimney. That’s the single most useful thing to understand about inspection work in Beverly Hills. Estates here often carry a living room fireplace, a library or study fireplace, one in the primary suite, and sometimes a decorative stack on an exterior wall that hasn’t drawn smoke in decades. Each flue has its own liner, its own crown, its own history. We inspect them one at a time and document them one at a time, which is what lets an owner or a property manager make a decision about one flue without guessing about the others.
Our technicians have up to 12 years of experience, and chimney work is the only trade we practice. No roofing, no HVAC, no general handyman scope. From the firebox to the crown, every component gets inspected and reported in the same visit. We’re familiar with the larger properties around Trousdale Estates and the streets just north of Sunset Boulevard, where garages, guest houses and additions have often left the original chimney stack oddly placed or partially enclosed. We can work with your insurer on documentation you need for a claim or a policy review.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Beverly Hills
The type of inspection you need depends on what’s being asked of the chimney. Here’s how the levels break down for Beverly Hills properties.
Level 1 Inspection
A Level 1 is a visual inspection of the accessible parts of the chimney: the firebox, damper, smoke chamber, flue from the firebox up as far as can be seen, and the exterior crown and cap. It’s the right call for a Beverly Hills home that burns occasionally and has no known problem. On a house with several fireplaces, we inspect each one and note its condition separately.
Level 2 Inspection
A Level 2 adds a camera run of the flue liner and a closer look at accessible attic, crawl space and chase areas. This is the inspection most Beverly Hills estates actually need, particularly when a property is changing hands or when an original clay tile liner has never been looked at. It’s also the level a property manager should request before renewing a policy on a hillside home with multiple appliances.
Level 3 Inspection
A Level 3 is recommended when a Level 1 or Level 2 turns up something that can’t be resolved visually, such as suspected damage behind masonry or a flue with a hidden obstruction. The inspection may involve removing a section of chimney or interior wall covering. We don’t recommend it until the evidence supports it, and we explain what we found before anything gets opened up.
Camera Inspection
Camera inspection is where the honest answers come from. We run a camera down the flue and record what it finds, including cracks, gaps between clay tiles, spalling mortar joints and obstructions. You see the footage. If a flue can be resurfaced with HeatShield rather than relined, we’ll say so, and we can do that work because our technicians are trained in the HeatShield system.
Trusted Brands We Service in Beverly Hills
We work with a curated set of professional-grade chimney product brands: DuraFlex for flexible stainless liners, HeatShield for flue resurfacing, Gelco and Famco for dampers and caps, Olympia Chimney for liners and components, and Copperfield for caps and crowns. These are the brands chimney specialists actually install, not what a general contractor picks up at a big-box store. When your inspection turns up a worn damper or a failing cap, we’ll tell you what part we’d use and why, and we can put the repair on the same written estimate as the inspection. Fast turnaround, and the price is set per job.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Beverly Hills Homes
The warm, dry Southern California climate means fireplaces here see light, occasional use. Buildup is slow. But long idle periods are their own problem, and the housing stock adds a few more.
- Cracked, spalling crowns on older estates. Decades of dry sun wear down the mortar crown on 1920s-1950s Spanish Colonial and Tudor homes, and water tracks down onto original clay flue tiles and loosens joints in the smoke chamber. A sweep-only visit misses this completely.
- Mud dauber nests and palm frond debris. In the hillside streets, rarely used decorative flues collect nests and debris that block the flue entirely. The resulting draft problem gets mistaken for a drafting defect in the fireplace itself.
- Gas-converted and insert fireplaces going uninspected. An insert or a gas log set is often assumed safe because there’s no wood smoke. The liner and damper underneath can deteriorate for years unnoticed.
- Worn mortar joints between original clay tiles. The tiles themselves usually hold. It’s the joints that fail, and that’s what camera inspection is for.
Pricing for Chimney Inspection in Beverly Hills, CA
A typical Level 1 inspection in Beverly Hills runs $150 to $275 for the first flue, with additional flues on the same property usually adding $50 to $100 each. A Level 2 with camera inspection typically runs $275 to $500, and a larger estate with several flues and a full photo report can run $600 to $900. A Level 3, when it’s needed, is quoted separately because it involves opening up part of the chimney. Costs rise with the number of flues, roof access difficulty on steep hillside lots, and whether the report needs to meet an insurer’s or a buyer’s requirements. The written estimate sets the final price, the estimate is free, and nothing gets recommended that isn’t supported by camera footage you can see.
We Also Serve Cities Near Beverly Hills
We work throughout the Westside, including West Hollywood, Westwood, Culver City and Brentwood. The same inspection standards apply across all of them, and the same written estimate process. If you’re outside Beverly Hills, call anyway and we’ll let you know what we can do.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Beverly Hills
Yes, and for a different reason than heavy-use fireplaces do. Light use means slow creosote buildup, but it also means long idle periods where debris, nests and soot collect, and where a crown or mortar joint can fail without anyone noticing. Call (866) 937-7635 to book an inspection and get your flues documented.
Most Beverly Hills estates with original clay-lined flues need a Level 2. A Level 1 is visual only, a Level 2 adds camera inspection of the flue liner, and a Level 3 opens up part of the chimney when the evidence points to hidden damage. Call (866) 937-7635 and we’ll help you decide which level fits your property.
No, not when it’s done properly. Inspection work here means protective drop cloths over floors and hearths, careful handling around original tile and millwork, and no destructive opening unless a Level 3 is actually needed. Call (866) 937-7635 for an estimate.
Because a flue that sits unused for months is an open, sheltered cavity, and that’s exactly what the local insects and wind-blown palm material find. The nests and debris block draft and can look like a fireplace defect when the chimney is fine. Call (866) 937-7635 to have it cleared and inspected.
A camera inspection tells you. If the creosote is glazed or there are gaps between clay tiles, a standard sweep isn’t the answer; HeatShield resurfacing or a liner decision usually is. Call (866) 937-7635 for a free estimate and look at the footage with us.
Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.