Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Brentwood
If you’re searching for a chimney sweep in Brentwood, here’s the short version: a routine sweep and Level 1 inspection typically runs $150 – $280, and every job starts with a camera look inside the flue before anyone recommends a thing. We only do chimneys, and we do them completely, from the firebox to the crown. That matters in Brentwood, where the house you live in decides how the work gets done. A two-story tract home off Sand Creek Road and a brick chimney near Oak Street downtown are two different animals, and we treat them that way. Call (866) 937-7635 to book a sweep.
Why Brentwood Homeowners Call Brentwood Chimney Sweep for Chimney Sweep
We’re a chimney-only specialist, so the call you make for a sweep doesn’t turn into a pitch for roofing, HVAC or general handyman work. That single-trade focus is why Brentwood homeowners keep our number: the person on the roof does chimney work and nothing else.
Serving Brentwood means knowing the town’s two chimney vintages by sight. On the east and south sides, the “chimney” on a Mediterranean-style stucco house is often a factory-built zero-clearance flue enclosed in a chase, and it needs the manufacturer’s specified brush, not a masonry brush. In the older pocket near Oak Street and the surrounding downtown blocks, we’re looking at brick stacks with clay-tile flues, spalling mortar and crowns that have taken decades of sun. Recognizing which one you have before the first pass up the flue is the difference between a clean job and a damaged liner.
Our technicians have up to 12 years of experience, and they work with professional-grade materials from brands chimney specialists actually use, including HeatShield for resurfacing liners and DuraFlex for liner systems. Pricing is set per job by a written estimate agreed before booking, the estimate itself is free, and a sweep includes a camera inspection with a photo report you keep. We answer 24/7. Fast dispatch from 7am to 7pm.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Brentwood
The services Brentwood homeowners ask for most are all here under one roof. Our chimney sweep team handles inspection, creosote removal, soot removal and fireplace cleaning, and we do it the same way whether you’re in a new build or an older masonry home.
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the chimney, firebox and connector, and it’s the right check for an annual safety visit or a home you already know well. In Brentwood’s newer stucco subdivisions, that often means confirming a factory-built unit’s damper and firebox are working as designed, not just running a brush and calling it done.

Level 2 Inspection
A Level 2 inspection adds a camera run through the flue and gets into the parts you can’t see from the roof or the hearth. We recommend one after a change in how the chimney is used, after a chimney fire, before a real-estate sale or when you’ve just moved into a Brentwood home with no service history. Seeing the liner, the smoke chamber and the damper joints on camera before agreeing to any repair is the whole point.

Creosote Removal
Brentwood’s long hot off-season lets creosote bake hard and glaze onto flue walls, and glazed creosote doesn’t come off with a light brushing. It takes targeted removal by a technician who knows the flue material, and it’s a job you want finished before the first cold week of December. Removing it safely also protects the liner from the corrosive film a heavy deposit leaves behind.

Soot Removal
Soot accumulates at the smoke shelf and the top of the firebox, and left too long it cakes into a hard, acidic layer that eats into masonry and metal. In homes near the downtown blocks with older fireboxes, soot removal is usually paired with a fireplace cleaning so the firebox face and hearth come out clean too. Every visit ends with a camera photo report so you can see what came out of the flue.
Trusted Brands We Service in Brentwood
We work with a curated set of professional-grade brands: Olympia Chimney for caps and liners, Famco for venting components, Copperfield for crowns and chase covers, and DuraFlex for flexible liner systems, plus HeatShield for resurfacing. These are the names chimney specialists actually order from, and knowing their products means we can match the right part to your flue rather than improvising. We don’t keep parts in stock or claim a warehouse of inventory; what we do is source the correct component for your specific vintage and flue system and move the job forward without a second contractor.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Brentwood Homes
Brentwood has two distinct chimney populations, and the failures differ by vintage. Here’s what we run into most.
- Zero-clearance flues swept like masonry stacks. In the stucco subdivisions on the east and south sides, a factory-built flue hidden in a chase gets cleaned with the wrong brush and the manufacturer’s liner check gets skipped, which can damage the liner in a single visit. The correct approach starts with identifying the unit and the brush specification before anything goes up the flue.
- Relining or crown work recommended without evidence. In the older brick homes near Oak Street, a cracked clay tile or a spalling mortar joint is a real problem, but it should be a visible one. Ask to see the camera footage and the photos before you agree to any crown repair or relining, and walk away if there’s nothing to look at.
- Glazed creosote left through the off-season. Brentwood’s hot, dry, often windy summers let creosote bake hard in the flue, and the first December burn can break it loose as a smoky draft failure. Cleaning in the fall, before the cold snap, is the way to avoid it.
- Caps and spark screens packed with summer debris. Dry summer winds drop leaves, twigs and dust that pack a flue cap and spark screen, and a blocked cap is a downdraft waiting to happen. A cap check belongs in every sweep.
Pricing for Chimney Sweep in Brentwood, CA
Pricing for chimney work in Brentwood runs in a normal range, and the written estimate sets the final price. A typical annual sweep in Brentwood runs $150 – $280 depending on the flue system and how heavy the creosote load is. A Level 1 inspection as a standalone visit is usually $120 – $250, and a Level 2 inspection with a full camera run is $200 – $450. Creosote removal where glazing has built up runs $250 – $600. Fireplace cleaning is $120 – $250. A HeatShield flue resurfacing, which handles a deteriorating liner without a full reline, typically runs $1,800 – $3,500, and a full liner replacement with DuraFlex is $3,500 – $7,000. Crown and cap work ranges from $400 – $1,200. The estimate is free, and nothing is recommended without a camera photo report you review first.
| Service | Typical Brentwood range |
|---|---|
| Annual sweep | $150 – $280 |
| Level 1 inspection (standalone) | $120 – $250 |
| Level 2 inspection (camera) | $200 – $450 |
| Creosote removal (glazed) | $250 – $600 |
| Fireplace cleaning | $120 – $250 |
| HeatShield flue resurfacing | $1,800 – $3,500 |
| Full liner replacement (DuraFlex) | $3,500 – $7,000 |
| Cap and crown work | $400 – $1,200 |
We Also Serve Cities Near Brentwood
Brentwood is our home base for this work, and we also handle chimney sweeps and inspections in Westwood, Santa Monica, Pacific Palisades and Beverly Hills. If you’re just outside Brentwood’s city limits, call and we’ll tell you whether we cover your street. The same camera-first approach applies wherever we work.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Brentwood
Smoke rolling into the room on the first cold burn is usually a stuck builder-grade damper, an obstructed shallow firebox, or a cracked or separated cooling liner inside the stucco chase. In the newer two-story tracts off Sand Creek Road and the east-side subdivisions, that’s the most common cause we find. A camera inspection shows you which one is happening before anyone touches the flue. Call (866) 937-7635 for an exact quote; estimates are free.
If your home was built in the 1990s or later in a stucco subdivision on the east or south side, the odds are strong you have a factory-built zero-clearance flue inside a chase, even if the exterior looks like masonry. The only reliable way to tell is a camera inspection that shows the liner material. Older homes near Oak Street and the downtown blocks are more likely to have true brick stacks with clay-tile flues. Call (866) 937-7635 for an exact quote; estimates are free.
Yes, it’s a real risk here. Brentwood’s hot, dry, often windy summers bake creosote hard and glazed onto flue walls through the off-season, and the first cold December burn can break it loose as a smoky, dangerous draft failure. Cleaning before the cold snap is the way to prevent that. Call (866) 937-7635 for an exact quote; estimates are free.
Dry summer winds drop leaves, twigs and dust that pack flue caps and spark screens, and a blocked cap leads to downdrafts and smoke inside the house. A cap check belongs in every annual sweep, and it’s one of the fastest things we can fix. Call (866) 937-7635 for an exact quote; estimates are free.
Before you agree to relining or crown work, you should see the camera footage and the photo report that shows the spalling, the cracked clay tile or the deteriorated crown. We recommend a repair only when the evidence is visible, and we’ll tell you plainly when work can safely wait. HeatShield resurfacing is often the cheaper option when the liner is deteriorating but a full reline isn’t needed. Call (866) 937-7635 for an exact quote; estimates are free.
Call Brentwood Chimney Sweep at (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you need an annual sweep, a Level 2 inspection or a HeatShield resurfacing, you’ll get the camera photo report before anyone recommends a repair, and the written estimate you agree to before booking is the final price.
Written by the team at Brentwood Chimney Sweep.