Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Brentwood Homeowners
If your fireplace has gone a season or two without a sweep, the creosote building up inside the flue is the part you can’t see and the part that matters most. A chimney sweep in Brentwood clears that buildup, checks every component from the firebox to the crown, and tells you plainly what needs attention now and what can safely wait. Our technicians have up to 12 years of experience, and we only do chimneys, so the inspection isn’t a sales pitch for other trades. Call (866) 937-7635 and we’ll book your sweep. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Sweep Service Includes
Every visit fits the job in front of us. Some homes need a standard cleaning; others need camera work, a resurfaced liner, or a crown repair caught early. Here’s what each part of the service covers.
Level 1 Inspection
A Level 1 inspection is the basic visual check that comes with a routine sweep. We look at the accessible parts of the firebox, damper, flue, and cap, and note anything that’s worn, cracked, or blocked. You need one whenever you’ve been burning regularly and nothing has changed since the last visit; it’s also the inspection most annual maintenance calls include.

Level 2 Inspection
A Level 2 inspection goes further, using a camera to see the full length of the flue, including the parts a flashlight can’t reach. You need one after a chimney fire, after any change to the appliance or fuel type, when you’re buying or selling a home, or when a Level 1 turns up something that needs a closer look. We walk you through the camera footage as we go so you’re seeing the same liner we are.

Creosote Removal
Creosote is the tar-like residue that condenses inside the flue as smoke cools, and it comes in stages from soft soot to a hardened, glossy glaze. The glazed stage is the one that catches fire, which is why removal is the core of what a sweep does. We brush and scrape the flue to clear the buildup, and when the liner surface itself is rough and holding creosote, HeatShield resurfacing can smooth it back to a clean, sweepable surface.

Soot Removal
Soot is the fine, powdery carbon left behind after burning, and it coats the firebox, smoke chamber, and damper area. Left alone it stains the surrounding masonry and dulls fireplace performance. We clear it from the firebox through the smoke shelf, contain the dust with drop cloths and a HEPA vacuum, and leave the room as clean as we found it.
Annual Sweep
An annual sweep is the once-a-year cleaning that keeps a wood-burning chimney safe and efficient. It’s the right call before the burning season starts, or any time you’ve burned a cord or more since the last cleaning. We combine the sweep with a Level 1 inspection so you get both the cleaning and a clear picture of the chimney’s condition in one visit.
Fireplace Cleaning
Fireplace cleaning covers the firebox itself: ash removal, soot on the brick and glass, and the grate and andirons. It’s the finishing touch that makes a fireplace look and smell right again after a season of use. We handle gas and wood-burning fireboxes within the chimney scope, and we’ll flag any firebox cracks or damaged panels that need repair.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
We work with professional-grade chimney products from six brands, and that matters at sweep time because the condition of your liner, cap, and crown shapes how the cleaning goes. DuraFlex liners are a common sight in relined flues, and we know how their flexible construction wears and where creosote tends to collect along the seams. HeatShield is the system we use for flue resurfacing, and it takes specific product knowledge and application skill to apply correctly, which is why we treat it as its own specialty rather than a shortcut.
Olympia Chimney and Famco components show up on caps, dampers, and liner systems across Brentwood homes, and we’ve learned where each one is likely to fail first so a sweep doubles as an honest condition check. Copperfield crowns and caps are built to shed water, and when we inspect one we’re looking at the seal and the mortar joint, not just the surface. Whether your chimney carries DuraFlex, HeatShield, Olympia Chimney, Famco, Copperfield, or Gelco, or you’re not sure what’s up there, we can help. We don’t claim to be a dealer for any of them. We know the products and how they hold up.
Signs You Need Chimney Sweep Right Now
- You smell smoke in the room when the fire is lit. A smoky draft usually points to a blocked or heavily coated flue. It’s a sign airflow is restricted and the chimney needs a look before the next fire.
- There’s a black, tar-like film on the damper or firebox walls. That’s glazed creosote, the stage most likely to catch fire. It doesn’t brush off like soot, so it needs proper removal, sometimes with resurfacing.
- Burning produces less heat than it used to. A soot-coated flue and a clogged smoke chamber cut efficiency. If the fire struggles to draw, the chimney is telling you it’s overdue.
- You hear birds or scratching from the flue. Nests and debris block the flue and are a fire and carbon monoxide risk. A sweep clears the obstruction and a cap keeps it from happening again.
- It’s been more than a year since the last cleaning. Even light use builds creosote, and a yearly sweep keeps it from reaching a dangerous stage. If you can’t remember the last one, it’s time.
Our Chimney Sweep Process – Step by Step
- 1
We talk through the chimney’s history. How often you burn, what you burn, and any symptoms you’ve noticed. That conversation tells us whether a standard sweep fits or a camera inspection is the smarter starting point.
- 2
We protect the room. Drop cloths go down and a HEPA vacuum runs throughout, so soot and dust stay contained instead of settling on your furniture. The cleaning is thorough; the mess isn’t part of it.
- 3
We sweep the flue and clear the firebox. Brushes sized to your flue run the full length, and we remove soot and ash from the firebox and smoke shelf. If we hit glazed creosote, we’ll show you and explain the resurfacing option.
- 4
We inspect with a camera when needed. For a Level 2, a camera travels the flue so we can see cracks, gaps, and liner condition on a screen. You see the same footage, so nothing is recommended on our word alone.
- 5
We report and advise. You get a clear rundown of what’s fine, what needs fixing, and what can wait. Nothing is pushed, and the written estimate sets the price before any repair begins.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Brentwood?
A standard chimney sweep in Brentwood typically runs $150 to $300 depending on the flue’s condition and how much buildup has to come out. A Level 1 inspection bundled with the sweep usually falls in that same range, while a Level 2 camera inspection typically runs $200 to $450. Creosote removal on a heavily glazed flue costs more, often $300 to $600, because it takes longer and may call for HeatShield resurfacing rather than brushing alone.
| Service | Typical Brentwood range |
|---|---|
| Standard sweep with Level 1 inspection | $150 – $300 |
| Level 2 camera inspection | $200 – $450 |
| Heavy creosote removal | $300 – $600 |
| HeatShield flue resurfacing | $1,200 – $3,000 |
What moves the price: the flue’s size and length, how much creosote has built up, whether the chimney has multiple flues, and whether repairs like a cracked crown turn up. You avoid overpaying by getting a written estimate before work starts and by asking to see the camera footage for anything recommended. Our estimates are free, the sweep price is agreed before we book, and the written estimate sets the final number. Nothing gets added after the fact.
Chimney Sweep Near Brentwood – Our Service Area
We connect homeowners across Brentwood and the surrounding Westside with independent local professionals for a chimney sweep, and we also cover Santa Monica, Beverly Hills, Venice, Mar Vista, West Hollywood, Culver City, Sherman Oaks, Marina del Rey, and Encino. Response times depend on the neighborhood and the season, so it’s best to book before burning season starts. For a sweep on the coast side, see our chimney sweep page.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Brentwood
A chimney sweep is a professional cleaning of the flue, firebox, and smoke chamber to remove soot and creosote. It’s the routine maintenance that keeps a wood-burning chimney safe and drafting properly. We pair the cleaning with a Level 1 inspection so you also get a condition report. Call (866) 937-7635 to book yours.
A standard sweep usually takes about 45 minutes to an hour, and a Level 2 camera inspection adds roughly 30 minutes. Heavier creosote or multiple flues can stretch the visit to a couple of hours. We’ll tell you up front what to expect for your chimney. Call (866) 937-7635 for an exact quote.
Most sweeps in Brentwood land between $150 and $300, with camera inspections and heavy creosote removal running higher. The final price depends on the flue’s condition and what turns up in the inspection. The written estimate sets the price before we start. Call (866) 937-7635 for an exact quote; estimates are free.
Yes, we work with both. DuraFlex liners are common in relined flues, and we know where their flexible seams collect creosote. HeatShield is the resurfacing system we apply when a full reline isn’t necessary. Whether you have DuraFlex, HeatShield, Olympia Chimney, Famco, Copperfield, Gelco, or an unknown make, we can help.
Same-day service is often possible depending on the schedule. We answer 24/7, and we dispatch fast from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 937-7635 to check availability.
Yes, we stand behind our sweeps and repairs with a satisfaction guarantee. If something about the cleaning or a repair isn’t right, we make it right. Our technicians are experienced and the local pro we connect you with is licensed and insured as the state requires. Call (866) 937-7635 with any questions.
Clear the area around the fireplace, remove any ashes and décor from the hearth, and make sure we can reach the firebox and roof access. Move fragile items off nearby surfaces and keep pets in another room during the visit. That’s all it takes, and it lets us get straight to work. Call (866) 937-7635 when you’re ready to schedule.
Schedule Your Chimney Sweep Service in Brentwood Today
Booking a sweep before burning season is the simplest way to keep your fireplace safe and your flue clear. Our team inspects, cleans, and advises, all through a Brentwood Chimney Sweep that treats your chimney as the whole job. Call (866) 937-7635 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday. See our chimney sweep page for the full service overview.
Written by the team at Brentwood Chimney Sweep.