Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Topanga
If your Topanga cabin has a cracked crown letting rain into the masonry, or a cap that’s missing, rusted out, or too small for the flue, we handle it. We work on chimneys only, so a cap and crown job here gets the kind of attention a generalist won’t give it. Topanga is a different animal from most of the Los Angeles basin: narrow canyon roads, steep driveways, and roofs you sometimes reach on foot. We plan for that access before we book. Call (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Topanga Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
Cap and crown work is the leading fix for chimney water damage, and it’s one of our five core services, not a side job we squeeze between roof repairs. We install and work with professional-grade products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, which matters on Topanga’s non-standard assemblies where an off-the-shelf part often won’t fit. Our technicians have up to 12 years of experience reading old flues and knowing when a crown can be repaired versus when it has to be rebuilt.
Topanga homeowners tend to call us for a second opinion after being told they need a full reline or major masonry work. We bring a camera, show you what’s actually inside the flue, and tell you plainly when a repair can safely wait. That’s the trust that keeps us coming back to Topanga for crown repairs, custom caps, and multi-flue work. From the firebox to the crown, every component gets inspected and serviced.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Topanga
Our chimney cap & crown team covers the full scope here, from a simple cap swap to rebuilding a crown on a river-rock chimney.
Cap Installation
A properly fitted cap keeps rain, animals, and debris out of the flue and helps stop downdrafts that push smoke into the living space on windy canyon evenings. On Topanga’s A-frames and owner-built cabins, the flue is rarely a standard size, so we measure and fit rather than grab something close. We work in Famco and Copperfield caps where the flue calls for it.

Cap Replacement
Old caps rust, bend, or come loose at the seams, and a cap that’s too small for the flue does more harm than good. When we replace one, we match it to the actual flue opening, whether that’s an original clay-tile liner or a retrofitted metal liner. If the cap sits behind a decorative facade, we plan the swap so the stonework stays intact.

Crown Repair
Topanga’s intense canyon sun and wet winters cycle the crown between hot and cold, and that thermal cycling cracks and spalls the concrete over the years. A cracked crown lets water migrate into the smoke chamber, which then rusts the damper and can crack the firebox. We repair or rebuild the crown with a proper overhang and flashing so water sheds off the top and away from the masonry.

Crown Coating
When the crown is sound but showing hairline surface wear, a protective coating can extend its life without a full rebuild. We use HeatShield products where the crown qualifies, and we’ll tell you honestly when coating is the wrong call. If the crown has structural cracks, a coating is a bandage, not a fix.
Trusted Brands We Service in Topanga
We install and work with a curated set of professional-grade brands: DuraFlex for flexible liners, HeatShield for crown and flue resurfacing, Gelco and Olympia Chimney for the structural pieces, and Famco and Copperfield for caps and top-of-chimney components. We don’t stock parts on a truck, so every cap and crown gets sized to your specific flue rather than forced to fit. That means a short turnaround and parts that actually belong on a Topanga chimney. Professional-grade materials from brands chimney specialists actually use.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Topanga Homes
- Crowns cracked by thermal cycling. Years of hot canyon summers and cool, damp winters crack and spall the concrete crown, letting water into the smoke chamber and rusting the damper. Left alone, that water works down into the firebox.
- Caps missing or undersized. A cap that’s too small for the flue lets animals and debris in without stopping downdrafts, so smoke pushes back into the living space. On tight canyon lots, wind direction makes a proper cap essential.
- Improperly sealed flashing. Where the chimney meets the roof is a common leak point on Topanga’s steep, owner-built roofs with irregular penetrations. Failed flashing sends water into the attic and walls, not just the chimney.
- Retrofitted appliances on old flues. Many Topanga hearths that started as open fireplaces now hold inserts or freestanding stoves, and we routinely find undersized liners and unpermitted thimble penetrations behind river-rock or adobe facades.
On Topanga’s older cabins, a chimney crown that has cracked and spalled from years of dry summers and damp winters lets water into the masonry, which then rusts the damper and cracks the firebox. A qualified local pro typically begins with a Level 2 inspection using a camera to document the flue liner’s condition, then repairs or replaces the crown with a proper overhang and flashing, and fits a custom cap sized to the specific flue, whether it’s a clay-tile liner or a retrofitted metal liner behind a river-rock facade. No two jobs use the same parts.
Here’s the local reality that drives most of this work. Topanga’s canyon homes are often custom-built with river-rock or adobe facades that hide undersized liners and unpermitted thimble penetrations. Off-the-shelf caps and standard crowns don’t fit these assemblies, so every job has to be adapted to an owner-built chimney. We start with the camera and show you the footage before recommending anything. You see what we see.
Pricing for Chimney Cap & Crown in Topanga, CA
A new cap on a standard flue typically runs $250 to $550, and a custom or multi-flue cap in Topanga’s market typically runs $450 to $900 given the non-standard assemblies. Crown repair usually runs $350 to $800, and full crown rebuilds on river-rock chimneys run $800 to $1,800 or more. Crown coating is the lower end, typically $200 to $450. What moves the price: access on tight canyon driveways, the size and shape of the flue, and whether the crown needs rebuilding versus repair. The written estimate sets the final price, and the estimate is free. Nothing gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Topanga
Canyon roads connect Topanga to the rest of the West Valley and the coast, and we regularly work in Tarzana, Pacific Palisades, Encino, and Brentwood. If you’re just outside Topanga or up one of the canyons, call and we’ll work out the access. Same cap and crown standard, same free estimate.
Serving Topanga, CA – Our Local Coverage Area
We serve Topanga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Topanga
Because the root cause is often thermal cycling, not the repair itself. Topanga sits in a high fire-severity zone with dry, brushy summers and cool, damp winters, and that swing cracks concrete crowns that weren’t built with expansion in mind. If a previous repair used a thin parge coat over a moving substrate, it’ll crack again. We check the crown’s structure and the flashing beneath it, not just the surface. Call (866) 937-7635 for an exact quote, estimates are free.
Yes, with the right approach to fastening. A custom cap sized to your specific flue can be anchored at the crown rather than driven through decorative stone, which is how we work on Topanga’s river-rock and adobe facades. The key is measuring first and choosing a mounting method that respects the masonry. We’ll show you the plan before we start.
Visible cracks wider than a hairline, crumbling or spalled edges, or water stains inside the smoke chamber point to repair or rebuild, not coating. Coating is for a sound crown with only surface wear. If the crown has lost its overhang or the flashing has pulled away, it needs more than a coating. The camera inspection tells us which side of that line you’re on, and we show you the footage. Call (866) 937-7635 for an exact quote, estimates are free.
If the cap wobbles, leaves gaps at the flue edge, or lets smoke push back into the room on a windy day, it’s the wrong size. A correctly fitted cap covers the flue opening with a slight overhang and seals tightly at the base. On Topanga’s non-standard flues, sizing is done by measurement, not guesswork. We’ll check yours and tell you straight.
Often, yes, but only if the cap is built for the number and spacing of flues you actually have. Multiple appliances vented into one stack are common on Topanga’s retrofitted cabins, and a single-flue cap won’t cover them safely. A multi-flue cap keeps rain and animals out of every flue while letting each vent properly. We measure the flue array first. Call (866) 937-7635 for an exact quote, estimates are free.
Ready to fix that crown or fit a proper cap? Call (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We only do chimneys, and we do them completely.
Written by the team at Brentwood Chimney Sweep.