Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Westwood
Westwood chimneys take a beating that inland chimneys don’t. Salt air off the marine layer works on metal caps and mortar crowns year-round, and by the time smoke backs up into a living room, the damage has usually been growing for a couple of seasons. We’re a chimney-only specialist, and our chimney cap & crown work is built around what this neighborhood’s climate actually does to a chimney. Our technicians have up to 12 years of experience, every estimate is free, and you’ll see the camera images before anyone recommends a repair. Call (866) 937-7635 and we’ll get a Westwood sweep or inspection booked.
Why Westwood Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
We only do chimneys. That single-trade focus means the cap and crown work isn’t an add-on to a roofing or handyman business – it’s the whole job, from the firebox to the crown. Westwood homeowners call us because we can talk through what failed and why, point to it on a photo report, and install professional-grade components from brands like Copperfield and Famco rather than a generic stainless cap from a hardware bin.
We serve Westwood and the surrounding Westside, including Brentwood, Beverly Hills, West Hollywood, and Santa Monica. That local footprint matters here: we know the older stucco chimneys and 1920s – 40s Spanish Colonial Revival homes common in this neighborhood, and we know that a painted-over spark arrestor or a decorative firebox is often hiding a bigger story. The local pro we connect you with is licensed and insured as their state requires. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Westwood
Four services do most of the work on Westwood’s coastal chimneys. Here’s what each one covers, and why it matters here specifically.
Cap Installation
A proper cap keeps rain, leaves, and animals out of the flue and keeps sparks inside the chimney. In Westwood’s tight lots, a correctly sized stainless cap also helps cut down on smoke complaints drifting between closely spaced homes. We size the cap to the flue rather than grabbing a stock unit, which is the difference between a draft that works and one that chokes.

Cap Replacement
Galvanized caps rust through at the seams and screen far faster near the coast than inland, where the air is drier. When a Westwood cap has failed, we usually replace it with stainless steel – it costs a bit more up front and lasts considerably longer in salt air. If the flue and crown are otherwise sound, a replacement is often a quick, same-day job.

Crown Repair
The crown is the concrete or mortar cap at the very top of the chimney that sheds water away from the masonry. When it cracks or spalls, water gets in and works down through the chimney structure. Westwood’s mild, damp climate – the marine layer sits on these roofs for months – makes a failing crown a real problem, because water sits rather than evaporating quickly. We repair crowns with proper slope and overhang so they actually shed water.

Crown Coating
Not every crown needs rebuilding. If the mortar is sound but porous, a crown coating can seal it and extend its life without the cost of a full repair. This is often the right call on 1920s – 40s homes where the crown is original but not yet failing. We’ll tell you plainly when coating is enough and when it isn’t, and you’ll see the reasoning in the inspection report.
Trusted Brands We Service in Westwood
We source and install components from a set of professional-grade brands, including Copperfield, Famco, and DuraFlex. Copperfield for caps and crown work, Famco where it fits, DuraFlex for liner connections when a cap install uncovers a flue problem. These are the brands chimney specialists actually reach for, not whatever’s on a big-box shelf. We don’t claim to stock parts locally – what we do is specify the right component for your flue, order it, and install it properly. Our scheduling is built around getting that turnaround done without leaving a chimney open to the weather any longer than necessary.
Common Chimney Cap & Crown Problems We See in Westwood Homes
The failure patterns here repeat. Here’s what tends to go wrong first.
- Rusted-through galvanized caps. The seams and the spark arrestor screen are the first to go, since salt air and marine-layer damp accelerate corrosion. Once the screen clogs with debris on top of that rust, smoke backs up into the living room on the first cool evening of the season.
- Cracked and spalling clay tile flues. The original clay tile liners in 1920s – 40s Spanish Colonial Revival homes crack and spall over time, and capping a chimney poorly can trap moisture that speeds it up. A camera inspection shows exactly where the liner stands.
- Decorative fireplaces with no liner. Many Westwood fireplaces were built for looks rather than wood heat, and some were never fitted with a proper liner at all. Creosote builds up and smoke can escape into tight lot lines where neighbors notice quickly.
- Painted-over spark arrestors and hidden damage. A coat of paint on a rusted arrestor hides the problem until it fails outright. In older homes off Westwood Boulevard and a few blocks from campus, this is a common find on exterior stucco chimneys.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Westwood, CA
A typical cap installation in Westwood runs $250 – $550, depending on flue size and whether you choose stainless or galvanized. A stainless cap replacement for a failed unit usually lands in the same range, and we recommend stainless here because of the salt air. Crown repair typically runs $350 – $750, while a crown coating – when the mortar is sound but porous – is generally $200 – $450. Multi-flue and custom caps cost more because they’re built to fit. These are estimated ranges; the written estimate sets the final price, and nothing gets recommended without camera evidence you can see for yourself. Estimates are free.
We Also Serve Cities Near Westwood
Westwood sits in a cluster of Westside neighborhoods we know well. Along with Westwood itself, we serve Brentwood, Beverly Hills, West Hollywood, and Santa Monica – and the same coastal exposure that wears on a Westwood chimney shows up on those rooftops too. If you’re just outside the neighborhood, call and we’ll tell you whether you’re in range.
Serving Westwood, CA – Our Local Coverage Area
We serve Westwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Westwood
Once a year, ideally before the first cool evening when you’ll want a fire. The salt air and marine layer here corrode metal faster than inland conditions do, so an annual look catches seam rust and a clogged arrestor screen before they turn into smoke backing up into the room. If you haven’t had it looked at in a couple of seasons, book one. Call (866) 937-7635 – estimates are free.
Cracks you can see, crumbling or spalling mortar, or a crown that no longer slopes away from the flue all point to repair rather than coating. Coating only makes sense when the mortar is still sound but porous – it seals, it doesn’t rebuild. We inspect and tell you which you need, with photos. Call (866) 937-7635 for an exact quote.
Usually yes. Many decorative fireplaces here were built without a liner, and we can fit one – sometimes with HeatShield resurfacing when a full reline isn’t necessary – then cap it properly. The inspection tells us what your flue can take. Call (866) 937-7635 to get it looked at.
Salt air and marine-layer dampness accelerate corrosion on galvanized caps, so seams and screens rust through sooner than they would in a drier inland neighborhood. Stainless steel holds up much better in this exposure. If your cap is showing rust, it’s worth a look before the season. Call (866) 937-7635 – estimates are free.
The cap is the metal cover on top that keeps out rain and animals; the crown is the concrete or mortar at the top of the chimney that sheds water off the masonry. The cap usually fails first here, because it’s metal and it’s exposed to salt air – but a cracked crown follows close behind if water gets in. Call (866) 937-7635 and we’ll check both.
Ready to Protect Your Westwood Chimney?
A failed cap or crown lets water and debris in and smoke out, and in Westwood’s coastal climate the damage moves faster than most homeowners expect. We inspect, show you the evidence, and install the right component for your flue – nothing more than the chimney actually needs. From the firebox to the crown, every part gets looked at. Call (866) 937-7635 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.