Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Westwood, CA
We provide independent HeatShield service across Westwood, CA. Westwood is full of fireplaces that were built for looks rather than wood heat, and the HeatShield liner work that matters here is reviving dormant, low-draw chimneys in a dense, leafy neighborhood where smoke complaints carry fast between close lots. What separates our approach is simple: we work on HeatShield’s cast-in-place liner systems every week, we know how those liners age in coastal-influenced air, and we bring that knowledge into homes and condos across Westwood instead of treating your flue as a routine wipe-down. We only do chimneys, and we do them completely, from the firebox to the crown. Call (866) 937-7635 for a free estimate.

Why Westwood Residents Choose Us for HeatShield Service
Most chimney outfits in the Westwood area sweeps a flue and leaves. HeatShield work is different, because the product is a cast-in-place liner system and its behavior in a specific chimney depends on the flue’s shape, moisture exposure, and how the fireplace is actually used. That’s where our familiarity matters. We’ve handled HeatShield jobs through the range of housing you find around Westwood, from 1920s Spanish Colonial Revival homes with original clay tile to mid-century apartments and condos where the fireplace is mostly decorative.
We bring professional-grade materials to every job and choose quality parts that fit the equipment already in your flue. Scheduling is straightforward: we book a sweep, agree on a flat price before we arrive, and show you what we find. Our technicians have up to 12 years of experience, and it’s all chimney work. You’re not hiring a roofing or HVAC shop that added chimneys to the list. Call (866) 937-7635 to set up HeatShield service in Westwood.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Westwood
HeatShield liners are durable, but they age, and Westwood’s conditions push on them in specific ways. These are the problems we run into most.
- Cracking from thermal cycling in lightly used fireplaces. A cast-in-place liner that heats up a few times a year and stays cold the rest of the time expands and contracts unevenly. In Westwood’s idle months, that cycling opens small gaps that leak smoke into the room before you notice anything from the outside.
- Resurfacing material debonding from the clay tile. Marine-layer dampness and winter rains work on the bond between a HeatShield Resurfacing System and the original clay tile underneath. When that bond weakens, the coating can separate and leave hidden voids that a standard sweep won’t reveal.
- Insulation mix settling around the liner. HeatShield Insulation Mix can settle over time, which lowers the insulation value and lets creosote collect in the space behind the liner. Settled insulation also shows up as weaker draw in a flue that once worked well.
- Custom flue caps loosening or corroding at the attachment points. Salt air and coastal moisture work on the fasteners holding a HeatShield Custom Flue Cap in place. Once a cap is loose or the metal at the joints deteriorates, water and debris find their way in, and the chimney starts taking on moisture it can’t shed.
- Soot and debris buildup in fireplaces that sit unused for months. Westwood’s mild climate keeps fireplaces off for long stretches, and that’s plenty of time for leaf litter, animal debris, and old soot to collect. On the first cool evening it gets burned, a damp, loaded flue produces strong odors and a slow, smoky fire.
HeatShield Service in Westwood: What Local Conditions Mean for Your Equipment
The local reality that shapes HeatShield work here is the density. Westwood’s closely spaced lots and leafy, UCLA-adjacent streets mean smoke complaints travel fast from one property to the next. A dormant fireplace that smokes on first use doesn’t just annoy the household; it becomes visible to everyone within a few doors, often the same evening. That’s why liner performance in Westwood matters more than it does in spread-out areas where nobody sees your chimney smoke. The homes themselves, many dating from the 1920s through the 1960s and built with fireplaces as decorative features, tend to have undersized flues and original clay tile liners that were never tuned for steady burning. A few blocks from campus and in the older homes off Westwood Boulevard, we regularly find ‘decorative’ fireplaces that were never fitted with a proper liner at all, plus exterior stucco chimneys with rusted, painted-over spark arrestors. HeatShield resurfacing is often the right answer for those flues, but only after a Level 2 inspection confirms what’s actually there.
HeatShield Models & Products We Service in Westwood
We work with the HeatShield product line as an independent service provider, and our scope covers each part of it. That includes the HeatShield CeCure Sleeve, the HeatShield Resurfacing System, HeatShield Insulation Mix, and HeatShield Custom Flue Caps. Our HeatShield work starts with understanding which of those is right for your flue, not which one is easiest to install.
For liner systems we use HeatShield’s OEM components so compatibility and performance are what the product was designed for. For caps and dampers, we’ll use quality aftermarket parts when they meet or exceed the original specifications. If a HeatShield liner can be repaired with OEM materials, we recommend the repair over a full replacement. When safety or performance is already compromised, we say so and recommend a new installation.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Westwood
Chimney work is priced per job against a written estimate, and the estimate is free. Here’s the general shape of what HeatShield-related work runs in Westwood, so you know what to expect before anyone arrives:

| Service | Typical Estimated Range |
|---|---|
| Level 2 inspection (camera + photo report) | $180 – $400 |
| Standard chimney sweep and creosote removal | $180 – $340 |
| HeatShield resurfacing of an existing flue | $1,200 – $3,500 |
| HeatShield CeCure sleeve installation | $2,500 – $6,500 |
| Custom flue cap replacement | $250 – $650 |
What drives the price: the size and shape of the flue, how much repair versus full sleeve work is needed, access to the chimney, and whether the cap or crown needs replacing at the same time. We don’t recommend liner work without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can wait. Call (866) 937-7635 for an exact quote on your Westwood home.
Serving Westwood, CA – Our Local Coverage Area
We serve Westwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Westwood
HeatShield liners handle dampness well when the bond to the clay tile is sound and the cap is keeping water out. The failure we see is a debonded resurfacing coat after long damp stretches and winter rain, which traps moisture against the old tile. A camera inspection tells you which condition you’re in. Call (866) 937-7635 for a free estimate.
Yes, in most cases the HeatShield Resurfacing System is applied directly to the existing clay tile without tearing it out, provided the tile is structurally intact and clean. That’s the whole point of resurfacing when a full reline isn’t necessary. Call (866) 937-7635 for a free estimate.
Smoke rolling into the room on first use, a strong odor when the fireplace has been idle, visible cracks or flaking inside the flue, and a cap that’s loose or rusted at the fasteners all point to a liner problem. A Level 2 inspection confirms it. Call (866) 937-7635 for a free estimate.
Often yes, but it depends on the clearances and the flue’s dimensions in your specific unit. Factory-built fireplaces have their own requirements, and a Level 2 inspection is how we determine whether HeatShield work is appropriate. Call (866) 937-7635 for a free estimate.
Once a year is the standard, and in Westwood that annual check matters more because fireplaces sit idle for months and problems build quietly. In a typical Westwood home with a decorative fireplace, a HeatShield CeCure liner can develop cracks from years of sporadic use, letting smoke escape into the living space; a qualified technician performs a Level 2 inspection, identifies the failed liner, and recommends either resurfacing or a new CeCure sleeve so occasional fires burn safely. Call (866) 937-7635 for a free estimate.
Service Areas Near Westwood
We handle HeatShield service across Westwood and the surrounding Westside, including Brentwood, Santa Monica, Beverly Hills, Pacific Palisades, and Venice. If your chimney sits in one of these areas and you’re not sure whether HeatShield work applies, call and we’ll talk it through.
Book Your HeatShield Service in Westwood Today
If your Westwood fireplace has been idle and you’re not sure what’s inside the flue, a Level 2 inspection is the place to start. We’ll show you the camera findings, give you a written estimate, and tell you honestly whether you need HeatShield work now or can wait. Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.