Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Beverly Hills, CA
We provide independent Gelco service across Beverly Hills, CA, and the thing that sets our Gelco work here apart is the housing itself: most of these chimneys sit on 1920s-1950s estate walls, and Gelco clay flue tiles, caps and dampers in that setting need gentle handling, not a one-size-fits-all sweep. From the flats of 90212 to the hillside streets of 90210, we inspect, clean, repair and document Gelco chimney components with professional-grade parts chosen to fit what’s already in the stack. We’re an independent service provider, not authorized, sponsored or endorsed by Gelco, and we’ll tell you plainly when a component is worth repairing versus replacing. Call (866) 937-7635. We answer 24/7.

Why Beverly Hills Residents Choose Us for Gelco Service
We work on Gelco chimney and venting products every week, so the way their flue tiles, caps and damper hardware age in Southern California’s warm, dry climate is familiar ground. That matters in Beverly Hills, where a fireplace tends to be an architectural feature rather than a heat source, and where an owner wants the original finish left intact through a cleaning.
Our technicians have up to 12 years of experience. We choose quality parts that fit the dimensions already in your chimney. Where Gelco-compatible OEM tiles, caps and dampers are still available, we use them. When they aren’t, we specify equal-quality aftermarket parts matched to the original dimensions rather than trimming to fit. On estate chimneys we lean toward targeted repair – repointing, single-tile replacement, cap reseating – over a full reline unless the flue is genuinely compromised.
Scheduling is straightforward: you call, we book the sweep, and the price is set per job by a written estimate. The estimate is free, and it includes a camera inspection with a photo report you keep. Call (866) 937-7635 to set one up.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Beverly Hills
These are the Gelco issues we run into most in Beverly Hills, and each one traces back to how these homes are built and used.
- Spalled or cracked clay flue tiles. Decades of thermal cycling plus long idle stretches between fires can open joints and flake the surface of aged Gelco tile in Spanish Colonial and Tudor estates. Left alone, a cracked tile lets heat and gases reach the surrounding masonry. We inspect by camera before recommending anything.
- Multi-flue caps losing screws and screening. Santa Ana wind seasons work screws loose and tear bird screening on Gelco-style multi-flue caps. Once the screen is gone, palm frond debris and mud daubers move in. Reseating the cap and replacing the screen closes that door.
- Dampers seized open or shut. On decorative fireplaces used only a few times a year, an original Gelco damper can freeze in place, leaving the flue exposed to downdrafts and debris. Sometimes it frees up with service; sometimes the hardware is past saving.
- Worn mortar crowns and flashing. Rain gets in at the top of an older Gelco-capped stack when the crown has crumbled or the flashing has pulled away, and the tile degrades from above. Crown repair and flashing work stop that path.
- Bird nests and soot in long-idle flues. Slow buildup over years of light use leaves debris sitting in the flue until a first fire sends a smoky smell back into the room. A proper sweep clears it.
Gelco Service in Beverly Hills: What Local Conditions Mean for Your Equipment
In the hillside streets of 90210, a flue opened for cleaning routinely turns up mud dauber nests and palm frond debris sitting right alongside the soot. That combination is far less frequent in the flats of 90211 and 90212, where gas-converted and decorative fireplaces dominate and the flues mostly collect light soot. For a Gelco owner in the hills, it means the cap and its screening are doing more work than you’d think: a loosened multi-flue cap in a wind season is the front door for debris that then packs against the original clay tile liner. It also means a plain brush-and-vacuum sweep isn’t enough. We inspect the flue with a camera first, clear debris by hand where needed, and use soft brushes sized to the flue so aged terra-cotta doesn’t chip. A typical Beverly Hills job starts with an estate owner noticing a draft or a faint smoky smell from a fireplace used only a few times a year. A qualified sweep runs a Level 2 inspection, finds palm frond debris and a mud dauber nest lodged against the original clay tile liner beneath a loosened multi-flue cap, cleans gently, reseats the cap, and documents before and after with photos for the property manager. Where the inspection shows spalled tile joints or a worn crown, repointing and crown repair are usually quoted alongside the sweep rather than deferred.
Gelco Models & Products We Service in Beverly Hills
In Beverly Hills we service the kinds of Gelco products that live on estate and custom chimneys: original clay flue tile liners, multi-flue and single-flue chimney caps, top-mount dampers, and fireplace dampers with their firebox hardware. Each one is inspected on its own terms. A cap is checked for mounting and screen integrity, a damper for travel and seal, and a tile liner for joint integrity and spalling by camera.
Parts selection follows the same rule everywhere. If a Gelco-compatible OEM part is available, that’s our first choice. If the original is discontinued, we match equal-quality aftermarket parts to the measured dimensions. We don’t claim to stock parts or to be a Gelco dealer; we’re an independent shop that repairs, installs and services Gelco equipment with parts that fit it.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Beverly Hills
| Service | Typical estimated range |
|---|---|
| Level 1 inspection (camera, photo report) | $150-$300 |
| Level 2 inspection with cleaning | $295-$600 |
| Cap reseating or replacement | $225-$650 |
| Mortar crown repair or repointing (per area) | $350-$1,800 |
| Damper repair or replacement hardware | $180-$500 |
Those ranges are estimates only; the written estimate sets the final price. Cost depends on how many flues you have, chimney height, how much debris the flue holds, and whether the inspection turns up tile or crown work. A free estimate includes a camera inspection and a photo report, so you can see what we see before you agree to anything. Nothing is recommended without evidence you can look at yourself, and we’ll say plainly when work can wait. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Beverly Hills
Usually not. A cleaning clears debris; the decision about replacement comes from what the camera shows afterward, and an aged tile liner with sound joints and no spalling often continues in service. We recommend a full reline only when the flue is genuinely compromised, and we show you the evidence first.
Because hillside wind seasons and nearby palms deliver debris to the top of the stack, and a loosened cap or torn screen lets it in. The flats see far less of this. Reseating the cap and replacing the screening is the fix that keeps it out.
It depends on the hardware. Sometimes a seized damper frees up with service and keeps working; sometimes the mechanism is worn enough that new hardware is the cleaner answer. We inspect the damper and firebox assembly before we quote.
Yes. Old terra-cotta needs gentler handling than modern liners, so we use soft brushes sized to the flue and clear nesting debris by hand before any brushing. We also document the condition with before and after photos.
Once a year is the usual rule, even with light use, because long idle periods let debris and nests build up between fires. If the flue sits open or the cap has failed, an earlier look is worth it. Call (866) 937-7635 for an exact quote – estimates are free.
Service Areas Near Beverly Hills
We serve Beverly Hills and the surrounding Westside, including Brentwood, Pacific Palisades and Santa Monica, plus Westwood and West Hollywood. If you’re not sure whether your street is in our area, call and we’ll tell you.
Book Your Gelco Service in Beverly Hills Today
Call (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A sweep is booked by appointment, and the written estimate sets the price. We’ll inspect, show you the photos, and tell you what can wait.
Written by the team at Brentwood Chimney Sweep.