Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Brentwood Homeowners
Most chimney water damage in Brentwood starts at the top. A missing cap lets rain straight down the flue, and a cracked crown lets water seep into the masonry around it, where it quietly rots the structure from the inside. By the time a homeowner notices a ceiling stain or a musty smell in the firebox, the damage has usually been working for a season or two. Our technicians have up to 12 years of experience installing, replacing and repairing caps and crowns, and we carry the professional-grade materials to do it right. We only do chimneys, so this work is our whole trade, not a side job. Call (866) 937-7635 and we’ll get a free estimate on the books, with same-day service available when the schedule allows.
What Our Chimney Cap & Crown Service Includes
Caps and crowns are two different parts of the chimney top, and both fail in their own way. A cap keeps rain, birds and debris out of the flue. A crown is the sloped concrete or masonry surface at the very top that sheds water away from the chimney body. We handle both, plus the variants that come up on Brentwood roofs.
Cap Installation
A cap is a cover that sits over the flue opening on legs or a mesh base, letting smoke out while keeping weather and animals in check. You need one if your flue is open to the sky, which is common on older Brentwood homes where the original cap rusted away or was never fitted. We measure the flue, match the cap style to your fireplace type and install it so it seals tightly without blocking draft.

Cap Replacement
Caps don’t last forever. Galvanized models rust through, mesh screens tear, and wind can bend a cap out of shape until it no longer sits flat. If yours is rattling, rusted or missing chunks of screen, replacement is usually the right call rather than a patch. We remove the old cap, inspect the flue top while we’re up there and fit a new one sized to your chimney.

Crown Repair
The crown is the concrete cap on top of the masonry itself, and it’s where a lot of water damage begins. Hairline cracks let water in, and in a mild Brentwood winter that moisture works into the brick and mortar instead of draining away. We repair cracks and rebuild failing crowns with a proper slope so water runs off the way it should.

Crown Coating
Crown coating is a protective layer applied over a sound but weathered crown to seal small cracks and stop them spreading. It’s a good option when the crown is structurally intact but showing surface wear, and it saves the cost of a full rebuild. We prep the surface properly first, because a coating over dirt or loose material won’t hold. Using a flexible coating from a brand like Copperfield, we give the crown a watertight skin that moves with the masonry.
Multi-Flue Cap
Some Brentwood chimneys serve more than one flue, whether from a fireplace plus a furnace or a home with two fireplaces sharing a stack. A multi-flue cap covers the whole top in one unit, which looks cleaner and protects each opening at once. We build these to fit the exact footprint of your chimney so there are no gaps at the edges.
Custom Cap
Not every chimney is a standard size, and a cap that doesn’t fit properly is as bad as no cap at all. Custom caps are made to measure for oversized flues, unusual shapes or chimneys where a stock unit won’t seal. We take the measurements on site and have the cap fabricated to match, then install it so it sits level and locks down against wind.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with professional-grade products from brands that chimney specialists actually use, and that knowledge shapes how we repair and install. Famco caps and components are a common sight on Brentwood roofs, and we know how their mounting systems wear and where the weak points show up after a few seasons of sun and rain. DuraFlex products come into play when a cap or crown issue connects to the liner below, and we understand how those pieces fit together so the top of the chimney and the flue work as one system. Copperfield coatings are part of how we protect crowns that are sound but showing their age.
HeatShield is a name we rely on when a crown problem turns out to be a flue problem underneath. The HeatShield system lets us resurface a deteriorating flue liner without a full reline, which saves money when the liner is still structurally repairable. Knowing which of these products suits a given chimney is part of the job, and it’s why we don’t hand this work to a generalist. Whether you have Famco, Copperfield, DuraFlex, HeatShield or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water in the firebox after rain. If you find dampness, rust stains or a musty smell inside the fireplace after a storm, the cap or crown is likely letting water in. Left alone, that moisture reaches the damper and the liner.
- Cracks or crumbling on the crown. Visible cracks, flaking concrete or a crown that’s pulling away from the flue are clear signals it’s failing. Small cracks widen with each wet season, so catching them early keeps the repair small.
- A missing, loose or rusted cap. A cap that’s blown loose, rusted through or gone altogether leaves the flue open to rain, birds and debris. That’s a straightforward fix that prevents bigger problems.
- Birds, squirrels or debris in the flue. Nesting animals and leaves block the flue and create a fire and carbon monoxide risk. A proper cap with intact mesh keeps them out.
- Staining on the chimney exterior or ceiling. White efflorescence on the brick or a water stain on a nearby ceiling means moisture is getting into the masonry from above. The crown is one of the first places we check.
Our Chimney Cap & Crown Process – Step by Step
- 1
Inspection first. Before we quote anything, we look at the whole chimney top and the flue below it. We check the crown for cracks, the cap for wear and the flashing where the chimney meets the roof, because a leak isn’t always where it looks.
- 2
Camera check of the flue. A camera inspection tells us whether water has already reached the liner. This matters because a crown repair on top of a damaged liner only hides the problem. We include a photo report so you can see exactly what we found.
- 3
Written estimate. We put the scope and the flat price in writing before any work starts, so there are no surprises. If something can safely wait, we say so.
- 4
The repair or install. We remove the old cap or repair the crown, prep the surface properly and install the new component with the right materials for your chimney. Crown work gets a proper slope so water drains away from the flue.
- 5
Final check and walkthrough. We confirm the cap is secure and the crown sheds water, then walk you through what we did and what to watch for. You get the photos and a clear record of the work.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Brentwood?
Cap and crown work in Brentwood generally runs from a modest repair to a full rebuild depending on what we find. These are typical estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cap installation (standard single-flue) | $150 – $400 |
| Cap replacement | $175 – $450 |
| Multi-flue or custom cap | $300 – $800 |
| Crown coating | $250 – $600 |
| Crown repair | $350 – $900 |
| Full crown rebuild | $600 – $1,500 |
What moves the price is the size of the chimney, how many flues it serves, whether the cap is a stock size or custom, and how much of the crown needs rebuilding versus coating. Access matters too; a steep or high roof takes more care. The best way to avoid overpaying is to get a written scope that separates the cap from the crown, so you’re not paying for a rebuild when a coating would do. Our free estimate includes the camera inspection and a photo report, so you can see the evidence before you agree to anything. If a repair can wait a season, we’ll tell you.
Chimney Cap & Crown Near Brentwood – Our Service Area
We serve Brentwood and the neighborhoods around it, and we regularly work in Westwood, Pacific Palisades, Santa Monica, Beverly Hills, Venice, Mar Vista, West Hollywood, Culver City, Sherman Oaks, Marina del Rey and Encino. Response times depend on the schedule and the distance, and we’ll give you a realistic window when you call. If you’re comparing options across the area, our chimney cap & crown page covers the Westwood side, and the chimney cap & crown page covers Pacific Palisades.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Brentwood
A chimney cap is the cover over the flue opening that keeps rain, animals and debris out while letting smoke escape. The crown is the sloped concrete or masonry surface at the top of the chimney that sheds water away from the structure below. They work together: the cap protects the flue, the crown protects the masonry. Both are part of the chimney cap & crown work we handle for Brentwood homes.
Most cap installations and replacements take a couple of hours, and crown repairs or coatings are usually a single visit. A full crown rebuild can run longer depending on the size of the chimney and how much material needs to come off. We’ll give you a time estimate with the written quote so you can plan the day.
Cap installation typically runs $150 – $400, cap replacement $175 – $450, and crown repairs $350 – $900, with full rebuilds higher. Multi-flue and custom caps range from $300 – $800, and crown coatings from $250 – $600. The exact price depends on the size of your chimney and the condition of the crown; the written estimate sets the final figure. Call (866) 937-7635 for an exact quote, and the estimate is free.
Yes. We work with Famco caps and components and Copperfield crown coatings, and we know how each one wears and where it needs attention. We also handle DuraFlex and HeatShield products when the job connects to the liner below. Whether your chimney has one of these or another make, we can help.
Same-day service is available when the schedule allows, and we’ll tell you honestly when we can get out. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our work is backed by a satisfaction guarantee, and we stand behind the installation and materials we use. If something we installed isn’t performing the way it should, we’ll come back and make it right. We’ll go over the specifics with you before the job starts.
There’s not much you need to do. Clear access to the fireplace and the area around it, and let us know about any roof access issues or pets. We handle the rest, including the inspection and the photo report, so you can see what we found before we make any recommendation.
Schedule Your Chimney Cap & Crown Service in Brentwood Today
A cap and a sound crown are the simplest protection your chimney has, and fixing them early saves the liner and the masonry below. Our technicians bring professional-grade materials and a written estimate you can trust, backed by a satisfaction guarantee. Call (866) 937-7635 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also start with a Brentwood Chimney Sweep inspection or a full chimney cap & crown review.
Written by the team at Brentwood Chimney Sweep.