Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Brentwood
If your cap is askew, your crown is cracked, or you’ve spotted a water stain on the ceiling near the chase, call us at (866) 937-7635. We work on chimney caps and crowns all over Brentwood, and we answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday. Getting the right diagnosis here means knowing what kind of chimney you’re standing under, and in Brentwood that’s rarely the same answer twice.
Why Brentwood Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
Chimney caps and crowns are where the worst upselling in this trade happens. Someone climbs up, points at a crack, and hands you a number for a full rebuild. We don’t work that way. Every recommendation we make is backed by camera footage you can watch yourself, and we’ll tell you plainly when a crown can safely wait or when a coating will do the job a rebuild would.
Our technicians have up to 12 years of experience, and we only do chimneys. That focus matters when you’re deciding between a generic cap and one properly sized and listed for your flue type. We install professional-grade products from brands like Famco and Copperfield because those are the caps and crown materials chimney specialists actually trust, not the builder-grade pieces that came with the house.
Brentwood is a city of two chimney vintages, and we know both. The stucco subdivisions on the east and south sides sit over factory-built zero-clearance flues, while the older blocks near Oak Street and the downtown core have masonry stacks with their own set of crown problems. If you’ve had a contractor tell you those are the same job, get a second look.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Brentwood
Our chimney cap & crown team handles the full scope here, from a single cap swap to a rebuilt crown that actually sheds water the way it should.
Cap Installation in Brentwood
A properly sized cap keeps rain, leaves and animals out of the flue while still letting smoke escape. On a Brentwood zero-clearance flue, that means a cap matched to the specific termination on your chase top, not a universal piece bolted over the opening. We fit the cap to the flue type so it protects the liner underneath it.

Cap Replacement in Brentwood
Builder-grade caps on 1990s and 2000s homes corrode or blow loose after a run of dry, windy summers, and a loose cap is worse than no cap at all because it exposes the liner and packs debris into the opening. Replacement is often the whole job, not the start of one. We pick a listed cap rated for your flue and secure it against the wind that funnels through this valley.

Crown Repair in Brentwood
On the older masonry chimneys near Oak Street and downtown, the crown is usually where water gets in. It cracks and spalls where it meets the flue liner, and with no overhang to shed rain, water tracks down between the liner and the brick. We rebuild those crowns with the right slope and overhang so they push water away instead of feeding it into the stack.

Crown Coating in Brentwood
Not every crown needs to come off. When the mortar is sound but the surface is failing, a crown coating can seal it and buy years before a rebuild. HeatShield is one of the systems we use when resurfacing makes more sense than replacement, and we’ll tell you which side of that line yours falls on after we’ve looked.
Trusted Brands We Service in Brentwood
We work with a focused set of chimney brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. These are names that chimney specialists use, and they’re the reason we can fit a cap sized for your exact flue instead of forcing a generic part to work. When a crown coating or liner repair needs a specific system, we can source and apply it, and HeatShield resurfacing lets us fix a deteriorating flue without a full liner replacement in the right situation. You get a professional-grade product, correctly installed.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Brentwood Homes
Most of what we find here comes down to how Brentwood’s climate and building stock meet the chimney:
- Corroded or loose builder-grade caps on zero-clearance flues. From the street they look like masonry, but on the east and south sides that stucco chase usually hides a metal liner. Once the builder-grade cap corrodes or blows off, the liner and shallow firebox are exposed to leaves and water.
- Cracked crowns on older downtown masonry. Near Oak Street and the surrounding blocks, crowns have often pulled away from the flue with no overhang to shed water, so rain runs straight down between the liner and the brick.
- Clogged spark screens and flue caps. Brentwood’s dry summer winds pack twigs, dust and leaves into caps and screens, choking draft, so the first December burn pushes smoke back into the room instead of up and out.
- Water staining near the chase. A cracked crown or a failing cap letting Delta-driven winter rain in usually shows up first as a ceiling stain or a damp smell near the fireplace wall, well before anyone climbs up top to look.
Pricing for Chimney Cap & Crown in Brentwood, CA
These are typical Brentwood estimates for the most common jobs, and the written estimate sets your final price.
| Service | Typical Estimate |
|---|---|
| Single-flue cap, installed | $250 – $550 |
| Cap replacement on a factory-built flue | $300 – $650 |
| Custom or multi-flue cap | $600 – $1,800 |
| Crown coating | $300 – $700 |
| Crown rebuild | $800 – $2,000 |
Crown rebuilds on older masonry run toward the higher end because of the brickwork involved, while a straightforward cap swap on a zero-clearance flue often stays at the low end. You get an exact quote before any work starts, and none of it is recommended without camera evidence you can see. Call (866) 937-7635 for a free estimate; estimates are free.
We Also Serve Cities Near Brentwood
We work in Brentwood and the communities around it, including Westwood, Santa Monica, Pacific Palisades and Beverly Hills. If your chimney is on the west side and you’re weighing a repair you’ve been quoted, we’ll show you what’s actually going on before anything gets rebuilt. Call (866) 937-7635 and we’ll set up a visit.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Brentwood
Yes. That stucco chase on the east and south sides hides a factory-built zero-clearance flue, and the chase-top termination needs a correctly sized listed cap just like any other flue. Without one, the metal liner and shallow firebox are open to leaves, rain and animals. Call (866) 937-7635 for an exact quote; estimates are free.
You find out with a camera and a close look, not a guess. If the mortar is sound and only the surface is failing, a crown coating can seal it; if it’s cracked through or has pulled away from the flue, a rebuild is the real fix. We show you the footage and explain which applies to yours. Call (866) 937-7635 for an exact quote; estimates are free.
Dry summer wind packs twigs, dust and leaves into your cap and spark screen, choking the draft, so the first real fire backs smoke into the room. It’s one of the most common calls we get in December. A sweep and a cap check usually clear it. Call (866) 937-7635 for an exact quote; estimates are free.
It does. A zero-clearance flue hidden in a stucco chase needs a cap listed for that specific metal liner and termination, while the masonry chimneys near Oak Street take a different style of cap and crown work entirely. Getting this wrong is how caps fail early. Call (866) 937-7635 for an exact quote; estimates are free.
Because caps and crowns fail from weather, not from fire, and most of the damage we find happened while the fireplace sat unused. A bare minimum of burning also means creosote can bake and glaze over the off-season, then break loose on that first December burn. An inspection catches it before it’s a problem. Call (866) 937-7635 for an exact quote; estimates are free.
When you’re ready, call (866) 937-7635 for a free estimate. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday, with Sunday the start of a fresh week if a cap fails on a Saturday. You’ll see the camera evidence before we recommend anything, and the written estimate sets the price.
Written by the team at Brentwood Chimney Sweep.