Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Encino
If your chimney cap is rusted through or your crown has a visible crack, you’re in the right place. We install, replace, and repair chimney caps and crowns for homeowners across Encino, and we look at the whole chimney before we quote a single piece of it. Encino chimneys are older than most people expect, and a cap or crown job here only makes sense once we’ve seen what’s underneath. Our technicians have up to 12 years of experience, and we only do chimneys. Call (866) 937-7635 to book an evaluation. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Encino Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
We’re a chimney-only company, and that matters when you’re hiring for a job this specific. A roofer may slap a generic cap on a flue, but a roofer won’t send a camera down to check whether the liner under that cap is sound. Encino has a deep stock of mid-century ranches and Traditional homes, and the caps and crowns on those chimneys have been through decades of dry valley sun and wind. We treat the cap and crown as part of a whole system: flue, smoke chamber, crown, and cap all get looked at together. That’s the difference between a repair that lasts and one that hides a problem for another season.
Encino homeowners tend to be cautious about chimney work, and for good reason. The trade has a reputation for selling liners and crowns nobody needs. We quote from what the camera shows, and we walk you through that footage before any price is discussed. If a repair can wait, we say so. Our technicians have up to 12 years of experience, and we work with professional-grade materials from brands chimney specialists actually use: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Nothing is quoted blind.
We know Encino well enough to talk about it plainly. The flatland streets south of the Boulevard, the hillside runs above, and the long blocks of 1940s to 1960s single-story homes that make up so much of the housing here. When we quote a crown repair in Encino, we’re thinking about the specific way those mid-century chimneys were built, not a generic template.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Encino
From the firebox to the crown, every component gets inspected and serviced. Here’s what our Chimney Cap & Crown work covers for Encino homes.
Cap Installation
A proper cap keeps rain, birds, squirrels, and wind-driven debris out of the flue. In Encino, where long dry spells let soot and ash accumulate without rain to wash them away, a cap also helps keep that debris contained and stops it from masking liner defects. We install stainless and copper caps sized to the actual flue opening, not a generic off-the-shelf fit. If your chimney has multiple flues, a custom multi-flue cap is usually the better answer.

Cap Replacement
Most caps we replace in Encino are rusted generic models that stopped sealing years ago, or original caps that were never sized correctly. A cap that’s loose, cracked, or rusted through no longer does its job. We pull the old one, check the flue underneath for debris and damage, and fit a replacement that actually covers the opening. It’s a straightforward job that takes more time than people expect when the old cap has fused to the crown.

Crown Repair
The crown is the concrete or mortar cap at the top of the chimney, and it’s the part that takes the most weather. Cracked mortar crowns on mid-century single-wythe chimneys let water straight into the masonry. In Encino’s dry climate that water sits in the brick and mortar, and when we do get a cold snap it spalls the brick face and loosens the joints further. We repair crowns with a proper overhang and correct slope, so water runs off instead of soaking in. Rebuilding a crown is often the right call, and we tell you when it isn’t.

Crown Coating
When a crown is intact but showing surface deterioration, a crown coating can extend its life and close hairline cracks before they spread. Encino’s sun and the occasional Santa Ana wind event work on a crown year after year, and a coating is a reasonable middle path between doing nothing and a full rebuild. It’s not the answer for a crown that’s structurally failed, and we won’t sell it as one. The camera and a close look tell us which side of that line you’re on.
Trusted Brands We Service in Encino
We work with a short list of professional-grade brands, and we’d rather know six well than carry twenty badly: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters when a crown or cap interacts with a liner, because the materials have to work together. HeatShield resurfacing in particular lets us repair a deteriorating flue liner without a full reline, which saves money when the liner is still structurally sound. We don’t claim to stock every part in town, but we quote accurately and get the right materials in hand for the job. If a cap or crown needs a specific product, we’ll tell you what it is and why.
Common Chimney Cap & Crown Problems We See in Encino Homes
Encino has its own patterns, shaped by the housing stock and the climate. These are the four we run into most.
- Cracked crowns on single-wythe chimneys. Many flatland homes south of the Boulevard were built with a single wythe of brick, and their crowns crack from years of dry valley sun and wind-driven debris. Once that crack opens, water gets in and the masonry starts to fail from the inside.
- Missing or rusted generic caps. Generic caps fail long before the chimney does. In Encino’s dry season, soot and ash accumulate without rain to wash them away, so a failed cap lets birds and debris into unlined flues and masks liner defects nobody can see from the roof.
- No clay flue tile in older stacks. A technician in Encino knows that many chimneys in the 91436 flatlands were built with no clay flue tile at all. A routine sweep often turns into the discovery of a missing liner, and the homeowner has no idea until a camera goes down the flue.
- Original flues venting modern appliances. Clay-tile flues that were never relined can’t handle modern appliance venting. Replacing a cap without checking the liner first can leave a draft problem or a hidden third-degree creosote glaze right where you can’t see it.
Why Camera Evidence Comes Before Any Cap or Crown Quote in Encino
This is the part of the page that matters most. Many 91436 chimneys were built without clay flue tile, and the only way to know whether yours was one of them is to look down the flue. A cap and crown evaluation on a single-wythe 1950s stack often reveals a missing liner, and that changes the whole scope of the work. Replacing the cap and repairing the crown on a flue that needs relining first is money spent in the wrong order. So we run a Level 2 inspection with a camera before recommending a crown coating or a custom multi-flue cap. You see the footage. You get a plain explanation of what it shows. If the liner is sound, we proceed with the cap and crown. If it isn’t, we put the relining on the schedule first, and we don’t turn the cap into an emergency. Nothing gets recommended that you can’t see for yourself.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Encino, CA
Pricing here runs on the higher side of the trade because of what’s under those old chimneys. A typical cap installation in Encino runs $350 – $750. A cap replacement runs $300 – $650 including removal of the old one. Crown repair runs $450 – $1,200, and a full crown rebuild runs higher. Crown coating runs $400 – $800. A custom multi-flue cap for a Traditional home with two or three flues runs $650 – $1,400. What moves the price within those ranges is the condition of the crown, the number of flues, and whether the cap has to be custom fabricated to fit. If the flue turns out to need relining, that’s quoted separately and only after the camera shows it. The written estimate sets the final price, and the estimate is free.
We Also Serve Cities Near Encino
We handle cap and crown work in Encino and the surrounding valley, including Tarzana, Sherman Oaks, Studio City, and Brentwood. The housing stock changes block by block in this part of the valley, and the mid-century chimneys we see in Encino show up in the neighboring cities too. If you’re just over the line in Tarzana or Sherman Oaks, the same rules apply: camera first, quote second.
Serving Encino, CA – Our Local Coverage Area
We serve Encino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Encino
Because many Encino chimneys were built without a clay flue tile, and a cap or crown quote without camera evidence is a red flag. A single-wythe 1950s stack can look fine from the roof while the flue has no liner at all. Camera footage shows whether relining comes before the cap, and it’s the only honest basis for a quote. Call (866) 937-7635 for an exact quote; estimates are free.
Most cracked crowns on 1950s Encino ranches can be repaired rather than rebuilt, but it comes down to how far the crack runs and whether the brick underneath is spalling. A surface crack gets patched or coated. A crown that’s failed through its thickness gets rebuilt with a proper overhang so it sheds water again. We won’t call it a rebuild unless the crown actually needs one. Call (866) 937-7635 for an exact quote; estimates are free.
A custom multi-flue cap sized to the whole stack works better than individual caps on Encino’s two-story Traditional and Mediterranean homes. Individual caps leave gaps between flues and don’t protect the crown from rain. A single custom cap covers the full footprint and seals the crown edge. Copper and stainless both hold up well in this climate. Call (866) 937-7635 for an exact quote; estimates are free.
Yes. Rule 445 requires a full reline before a sale or remodel when the flue doesn’t meet current standards, so capping without checking the liner can leave you out of compliance at the wrong moment. The camera tells us whether your flue meets the standard. If it doesn’t, relining comes first. Call (866) 937-7635 for an exact quote; estimates are free.
Once a year, even for a fireplace that gets used a handful of times. Encino’s long dry spells let soot and debris accumulate without rain to wash them away, and that buildup masks liner defects. Low use doesn’t protect a chimney that was built without a flue tile in the first place. Call (866) 937-7635 for an exact quote; estimates are free.
Book Your Cap or Crown Evaluation in Encino
If your cap is rusted or your crown is cracked, the next step is a camera look and a plain-spoken quote. Call (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, across Encino and the surrounding valley. Nothing gets recommended without evidence you can see, and if a repair can safely wait, we’ll tell you.
Written by the team at Brentwood Chimney Sweep.