Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Pacific Palisades
If your cap is dented, your crown is cracked, or you’re not sure either one still seals, call Brentwood Chimney Sweep at (866) 937-7635 for a free estimate. We know Pacific Palisades well: the canyon-side ranch homes, the bluff-top mid-century builds, the narrow drives off Sunset and Palisades Drive where a service visit takes a little planning. Cap and crown work here isn’t cosmetic. It’s the first line of defense against water tracking down a flue and against wind-blown debris loading up a roof. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Pacific Palisades Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
We only do chimneys. That single-trade focus is why homeowners in Pacific Palisades call us for cap and crown work rather than a roofer or a handyman. From the firebox to the crown, every component gets inspected and serviced by technicians who have up to 12 years of experience, and the local pro we connect you with is licensed and insured as their state requires.
Our reputation in Pacific Palisades comes from doing the unglamorous part well: showing you the photos, explaining what we see, and telling you plainly when repair can wait. We work with professional-grade materials from makers chimney specialists actually use – DuraFlex for liner components, HeatShield for resurfacing, Copperfield and Famco for caps and hardware – so a replacement cap fits the flue it’s set on instead of being coaxed into place.
We’re also honest about what the coast does to a chimney. Pacific Palisades sits close enough to the water that marine-layer humidity and salt air chew through metal faster than homeowners expect. A cap that looks sound from the roof edge can be corroding underneath, which is why we check hardware as carefully as we check the crown.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Pacific Palisades
We handle the full cap and crown scope in Pacific Palisades, from a single replacement cap to a crown rebuild scoped alongside a Level 2 inspection. Each of these is quoted per job from a written estimate, and the estimate is free.
Cap Installation in Pacific Palisades
A properly sized cap keeps rain, birds, and sparks out of the flue. On Pacific Palisades homes with clay-tile flues, the fit has to be measured rather than guessed, because the original tile dimensions vary from one mid-century build to the next. We set stainless and copper caps from Famco and Copperfield, and we make sure the cap is anchored so a Santa Ana gust can’t lift it.

Cap Replacement in Pacific Palisades
Replacement is the most common cap job we quote in Pacific Palisades, and salt air is usually the reason. Marine-layer humidity rusts the damper and the cap hardware faster here than it does a few miles inland, so a cap that no longer seats or seals against rain and embers gets replaced rather than patched. Single-flue and multi-flue configurations both get measured on site.

Crown Repair in Pacific Palisades
The crown is the concrete or mortar cap at the very top of the chimney, and it takes the weather so the flue doesn’t have to. Decades of seismic settling and salt-air decay crack crowns and spall the mortar around the flue liner on older masonry chimneys here. We repair and rebuild crowns, and we scope that work before any replacement cap goes back on top.

Crown Coating in Pacific Palisades
When the crown is cracking but still structurally sound, a flexible coating can buy years before a rebuild. We prep the surface, seal the cracks, and apply a coating rated for coastal exposure. It’s a repair, not a mask: if the crown has broken loose from the flue, we’ll say so and quote the rebuild instead.
Trusted Brands We Service in Pacific Palisades
We work with a curated set of professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters on a cap and crown job because the right components are what make a repair last through another coastal season. We don’t claim to stock parts locally. Everything is supplied per job, which means turnaround tracks how quickly the correct cap or crown material can be sourced for your flue. If you’ve got an existing cap from one of these makers, we can service or replace it.
Common Chimney Cap & Crown Problems We See in Pacific Palisades Homes
- Palm fronds and eucalyptus litter jammed into the cap. After a Santa Ana wind event, canyon-side homes routinely end up with the spark arrestor packed solid. Draft drops, smoke backs into the room, and the cap itself becomes a fire load on the roof.
- Cracked or spalling crowns on mid-century masonry. The custom and ranch-style homes built here from the 1950s through the 1970s often still carry their original crowns. Seismic settling and salt-air decay open cracks that let water track down the flue and into mortar joints.
- Rusted dampers and corroded cap hardware. Marine-layer humidity is the culprit. The cap may look fine from the ground but no longer seat or seal, which is a slow leak waiting for the first real rain.
- Loose mortar around the flue liner. Cracked tiles and failing mortar show up on older clay-tile flues after decades of settling and coastal salt exposure, and that’s usually when a crown rebuild gets scoped alongside a Level 2 inspection.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Pacific Palisades, CA
Here’s what cap and crown work typically runs in Pacific Palisades. A single-flue cap installation usually ranges from about $250 to $550, with custom and multi-flue caps running higher, often $600 to $1,200 depending on the flue count and material. Crown coating runs roughly $300 to $700. Crown repair or rebuild typically falls between $800 and $1,800. These are estimates, and the written estimate you get after an inspection sets the final price.
What moves the number: how many flues the cap covers, whether the crown needs a coating or a rebuild, and how much corrosion the hardware has taken. If a cap only needs reseating and new hardware, we’ll say so rather than quote a replacement. Call (866) 937-7635 for a free estimate.
We Also Serve Cities Near Pacific Palisades
We serve Pacific Palisades and the surrounding Westside, including Santa Monica, Brentwood, Westwood, and Venice. If you’re just over the hill or down the coast, the same cap and crown service applies, and the drive is short either way. You can see our full Chimney Cap & Crown scope on the service page.
Serving Pacific Palisades, CA – Our Local Coverage Area
We serve Pacific Palisades and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Pacific Palisades
If wood is your main heat source, check the cap and crown at least once a year, and consider a mid-season look after a heavy burn stretch. Heavier burning loads the flue with creosote faster, and a cap packed with debris makes that worse by choking draft. Call (866) 937-7635 to book an inspection – estimates are free.
Because canyon-side homes in Pacific Palisades sit directly in the path of wind-blown palm fronds and eucalyptus leaves, and a Santa Ana event can pack them into the cap and spark arrestor in a single afternoon. A qualified technician typically pulls the debris, checks the arrestor mesh and flashing, and confirms the cap still seats and seals. A tighter mesh or a different cap design can reduce repeat clogging. Call (866) 937-7635 for a look.
Look for the difference between damage at the very top of the masonry versus damage to the metal hood sitting above it. Staining down the outside of the chimney, cracked concrete at the top edge, or loose mortar usually points to the crown; a bent, rusted, or missing hood points to the cap. Both can cause water intrusion, and both are checked together. Call (866) 937-7635 for an exact quote – estimates are free.
It means inspecting the crown surface for cracks and separation, checking cap hardware and the damper for corrosion, and confirming mortar around the flue liner is sound. On Pacific Palisades homes with original clay-tile flues, that often means scoping a camera and reviewing the photos together. Nothing gets recommended without evidence you can see for yourself. Call (866) 937-7635 to book it.
Yes, and it matters more than most homeowners realize. Burning unseasoned or wet wood and choking the air supply produces more creosote than burning dry, well-seasoned wood with a hot, clean fire. If fires are a rare indulgence in the mild coastal climate, a fireplace that sat cold for a season then gets lit hard is exactly the kind of use that builds up quick. Call (866) 937-7635 for an exact quote – estimates are free.
Book Your Chimney Cap & Crown Service in Pacific Palisades
If your cap is clogged, your crown is cracking, or you just want a straight answer on whether either needs work, we can help. We serve Pacific Palisades and the surrounding Westside from our Pacific Palisades base of operations. Every job starts with a camera inspection and a photo report, and you’ll get a written estimate before anything is booked. Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.