Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Sherman Oaks
Sherman Oaks chimneys take a beating that has nothing to do with how often you light a fire. The Valley heat, the dry Santa Ana winds, the chaparral-covered hills above the boulevard – all of it works on a cap and crown year-round. We’re a chimney-only specialist, which means cap and crown work isn’t a side job for us; it’s part of a scope that runs from the firebox to the top of the stack. Our technicians have up to 12 years of experience, and we know the mid-century ranch and traditional homes across this part of the Valley because that’s most of what’s here. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Sherman Oaks Homeowners Call Brentwood Chimney Sweep for Chimney Cap & Crown
Sherman Oaks sits in a high-fire-severity zone along the Santa Monica Mountains foothills, and that single fact shapes more of our cap and crown calls here than any other. Many of these jobs are driven by brush-clearance and fire-insurance inspections rather than by fireplace use. Insurers and LAFD brush-clearance rules treat the chimney as an ignition path, so the cap often has to be documented as a compliant spark arrestor, not just a rain cover. That changes what you need installed, and it changes how the work gets recorded.
Our reputation in Sherman Oaks rests on doing that documentation properly. We’ll get the cap, crown, and flue on camera and show you what’s actually there before anyone recommends a repair. We work with professional-grade materials from brands chimney specialists actually use – Olympia Chimney, Copperfield, Famco, and DuraFlex among them – and we don’t stock or warehouse parts; when a specific cap or crown material is called for, it’s ordered for your job. Our technicians have up to 12 years of experience reading these chimneys, and we put that experience in front of you on a screen rather than in a sales pitch. For a town where insurance paperwork matters, that evidence is the whole point.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Sherman Oaks
We handle cap and crown work as part of our chimney cap & crown service, and the four jobs below cover almost everything Sherman Oaks homeowners actually need.
Cap Installation in Sherman Oaks
A properly fitted cap keeps rain, birds, squirrels, and bees out of the flue, and on hillside streets it doubles as the spark arrestor fire inspectors want to see. We size the cap to the flue and the chimney, and on homes near the canyon edges we favor heavy-duty screens that hold up when chaparral leaf litter and ember debris start blowing.

Cap Replacement in Sherman Oaks
Older caps rust, warp, or lose their screening, and a clogged screen becomes a draft blockage. If your existing cap is packed with leaf litter from the surrounding chaparral, replacement with a compliant, correctly sized unit solves the inspection problem and the draft problem at once. We’ll show you the old cap and the blockage on camera first.

Crown Repair in Sherman Oaks
On mid-century masonry chimneys, the crown is where water damage usually starts. The 1940s-1960s housing stock across 91403 and 91423 often has original crowns with hairline cracks that go unnoticed until water stains show up at the firebox or smoke chamber. We repair cracked and spalled crowns so water sheds away from the masonry instead of soaking into it.

Crown Coating in Sherman Oaks
When a crown is sound but showing surface wear, a protective coating can extend its life without a full rebuild. We only recommend coating when the camera confirms the crown is structurally intact, and we say plainly when a repair is the better call. Coat it too early and you’re hiding a problem; coat it at the right time and you’re buying years.
Trusted Brands We Service in Sherman Oaks
Cap and crown work draws on the same professional-grade materials we use across the rest of the chimney, and we work with brands that specialists actually rely on: Olympia Chimney, Copperfield, Famco, and DuraFlex. We don’t keep parts on hand or run a warehouse – each cap or crown material is specified for your chimney and ordered for the job, so turnaround depends on the part and the schedule. That’s how we make sure what goes on top of your Sherman Oaks chimney is the right fit and the right rating for the flue beneath it, rather than whatever happens to be sitting around.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Sherman Oaks Homes
- Cracked clay tile flue liners. Original clay tiles crack and spall after decades of heating and cooling, letting moisture and creosote reach the masonry behind them. This is usually invisible from the ground and only shows up on camera.
- Hairline crown cracks on mid-century chimneys. Crowns on 1940s-1960s masonry chimneys develop fine cracks that stay hidden until water stains appear at the firebox or smoke chamber. By then the water has already been working on the structure.
- Clogged spark-arrestor screens on hillside homes. Screens pack with leaf litter and ember debris from nearby chaparral, creating a draft blockage that fire inspectors flag. A blocked screen is a safety issue, not a cosmetic one.
- Long-idle flues that harden creosote and invite nests. The Valley heat and dry Santa Ana winds mean fireplaces sit unused for months, so creosote hardens and birds, squirrels, and bees move in. The first cool-weather burn is when a blockage or glaze becomes a real hazard.
Pricing for Chimney Cap & Crown in Sherman Oaks, CA
Cap and crown pricing here reflects the housing stock: older masonry chimneys need more careful work than a newer prefab system, and hillside jobs sometimes call for heavier, compliant caps. A typical cap installation in Sherman Oaks runs $250-$550. Cap replacement, including removal of the old unit, runs $300-$650. Crown repair runs $350-$900, and crown coating runs $200-$450. Multi-flue caps and custom caps run higher, typically $500-$1,200, depending on the number of flues and the size of the chimney. These are estimated ranges, and the written estimate sets the final price. The estimate is free, and nothing is recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Sherman Oaks
We work across the Valley and into the hills around Sherman Oaks, and we also serve Studio City, Encino, Tarzana, and West Hollywood. If you’re just over a ridge or down the boulevard, the same cap and crown work applies, and the same camera-first approach comes with it. Call and we’ll confirm your address and book the visit.
Serving Sherman Oaks, CA – Our Local Coverage Area
We serve Sherman Oaks and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Sherman Oaks
Yes. A camera inspection should come before any cap or crown quote on an older clay-tile flue. Decades-old tiles crack and spall in ways you can’t see from the roofline, and a crown or cap recommendation made without seeing the liner is a guess. We run a camera and show you the crown, flue liner, and smoke chamber on screen, then recommend only what the video confirms. That’s how you avoid being sold work you don’t need. Call (866) 937-7635 for an exact quote – estimates are free.
Often, yes – a compliant spark arrestor cap is exactly what inspectors look for in this high-fire-severity zone. Because Sherman Oaks sits along the Santa Monica Mountains foothills, brush-clearance and fire-insurance rules treat the chimney as an ignition path, so the cap needs to function as a documented spark arrestor rather than a simple rain cover. A heavy-duty cap sized to your flue, with screening that isn’t packed with debris, addresses that. Call and we’ll walk you through what your inspection is likely to require.
You can’t tell from the ground, and neither can we until we’re on the roof with a camera. A cracked or spalled crown that’s letting water into the masonry needs repair; a crown that’s sound but showing surface wear can often be coated to extend its life. The difference shows up on camera, and we show you before recommending either. When a coating is all you need, we say so. Call (866) 937-7635 for an exact quote – estimates are free.
A multi-flue cap is a single cap assembly that covers a chimney with more than one flue, rather than capping each flue separately. If your Sherman Oaks home has a chimney serving a fireplace plus another appliance, or a wide masonry stack with several openings, a multi-flue cap is usually the cleaner, more weather-tight choice. It also tends to hold up better against the leaf litter and ember debris that blows off the chaparral here. Call and we’ll tell you whether your stack needs one.
Because an idle chimney is where problems quietly build. The Valley heat and dry Santa Ana winds let creosote harden, and birds, squirrels, and bees nest in flues that go untouched for months. By the time the first cool-weather burn comes, a blockage or glazed creosote can be a real hazard. An unused fireplace still has a chimney, and that chimney still needs a look once a year. Call (866) 937-7635 to book an inspection – estimates are free.
Whether your chimney crown is cracking or your cap is overdue for replacement, the first step is the same: get it on camera and see what’s actually there. We only do chimneys, from the firebox to the crown, so you won’t need a second contractor to finish the job. Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.