Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Venice, CA
We provide independent DuraFlex service across Venice, CA, and the one thing that makes our DuraFlex work here different is what we look for before we ever run a brush: moisture. Venice’s mild coastal climate means many fireplaces sit unused for months, so ocean air and salt do more damage to a stainless liner than creosote ever will. We handle DuraFlex as one of the liner brands we service, with no manufacturer authorization implied. From the firebox to the crown, every component inspected and serviced. Call (866) 937-7635 for a free estimate.

Why Venice Residents Choose Us for DuraFlex Service
DuraFlex liners have their own joint, insulation and cap conventions, and a sweep who works on them regularly knows where the factory-relining geometry differs from generic flex pipe. That matters in Venice, where narrow chimneys and tight flue offsets leave little room for guesswork. We’re a chimney-only specialist, so nothing about this work is an add-on to roofing or HVAC. We repair, install and service DuraFlex equipment with quality parts that fit it, and we’re clear about what we are: an independent shop, not a DuraFlex dealer and not affiliated with the manufacturer.
Scheduling is straightforward. You tell us what the fireplace is doing, we book a visit, and the technician inspects before recommending anything. Our technicians have up to 12 years of experience. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Nothing gets recommended without camera evidence you can see on the screen yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Venice
These are the DuraFlex failures we run into most often in Venice, and what local conditions have to do with each one.
- Insulated liner installed without a proper top plate or clamp. Without that seal, ocean moisture works into the insulation wrap and rusts the outer jacket from the outside in. In Venice’s salt air, that corrosion moves faster than most homeowners expect.
- Joint and band failures after a liner was cut to clear an offset. Narrow 1920s Venice bungalow flues often force a re-banded joint around the smoke shelf. A band that’s worked loose lets creosote and moisture collect at the seam.
- Rust-through at the bottom section where the liner meets the firebox. Salt air plus a damper left open in a rarely used fireplace keeps that lower section damp. It’s the first place we check with a camera.
- Caps and top plates pulled loose by winter storm wind. Once a cap lifts, rain gets straight to the liner and pest nests drop onto the DuraFlex connector. A loose cap is a small fix that turns into a liner problem if it waits.
- Failed insulation on an older insulated liner. When the wrap breaks down, the liner loses its protection and the flue loses its rating. That’s a reline conversation, not a patch.
DuraFlex Service in Venice: What Local Conditions Mean for Your Equipment
North of Rose Avenue, the walk streets and alleys are lined with 1920s cottages whose exterior chimneys were stuccoed over old brick without proper flashing. A DuraFlex liner inside one of those flues often sits behind a wall that’s quietly taking on wind-driven rain every winter storm. That’s why our inspections there look at the stucco-to-brick junction from the outside as well as down the flue. Liner corrosion and hidden mortar rot tend to show up together, and a camera alone won’t tell you the wall behind the liner is wet.
A typical job in a Venice beach cottage with an infrequently used wood-burning fireplace usually turns up a DuraFlex liner rusted at the connector and loose at a re-banded joint once the Level 2 inspection camera goes down. A damper that no longer seats is often part of the same picture. Because salt air and ocean moisture drive deterioration more than creosote does here, the usual fix is to address the liner connection and top plate, reseat or replace the damper, and correct the cap and flashing before the next winter storm pushes water behind the stucco.
DuraFlex Models & Products We Service in Venice
We service the full range of DuraFlex flexible stainless relining systems in Venice, including single-wall and insulated kits, the DuraFlex Pro and DuraFlex Plus flexible liner series, ovalized liner sections sized for tight flues, and top-plate and multi-flue cap assemblies. When a part needs replacing, we use DuraFlex-compatible OEM components – liners, top plates, clamps, caps – wherever the existing system is still serviceable. Quality aftermarket parts are fine for non-structural pieces like caps or damper hardware. If the liner shows pitting, open seams or failed insulation, relining beats patching, and we’ll tell you so plainly rather than sell a repair that won’t hold. See our DuraFlex brand page for the full scope of what we handle.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Venice
A DuraFlex chimney cleaning and inspection in Venice is priced per job, and the written estimate you get before booking is the price you pay. Nothing changes on the day.

- Level 2 inspection with camera and photo report: quoted per flue and chimney configuration
- Sweep of a DuraFlex-lined flue: quoted by liner size and access
- Top plate, clamp or cap replacement: quoted by assembly type
- Damper reseat or replacement: quoted after inspection
- Chimney waterproofing at the stucco-to-brick junction: quoted by chimney size and condition
The estimate is free and includes a camera inspection and a photo report, so you can see the liner condition yourself before agreeing to anything. Call (866) 937-7635 for an exact quote.
Serving Venice, CA – Our Local Coverage Area
We serve Venice and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Venice
An inspection of an unused DuraFlex-lined fireplace should cover the liner connection at the firebox, the joint bands, the top plate and cap, the damper seat, and the exterior chimney wall where stucco meets brick. Disuse is exactly when problems hide, because nobody’s watching the flue. A Level 2 camera inspection shows you the liner interior and the photo report documents what we found. Call (866) 937-7635 to book one.
Salt air and persistent ocean moisture corrode stainless liner components faster than creosote does, particularly at the bottom section near the firebox where damp air collects. A damper left open in a rarely used fireplace makes it worse by feeding humid air straight up the flue. Annual inspections catch rust at the connector before it reaches the liner body.
They often are. In Venice’s walk streets and alleys north of Rose Avenue, exterior chimneys were frequently stuccoed over old brick without proper flashing, so wind-driven rain seeps behind the stucco and reaches the liner area from the outside. A liner connection that keeps corroding despite repairs is a sign the wall behind it is wet. We check both sides.
Many DuraFlex problems are repairable: a loose top plate, a failed clamp, a cap pulled off by storm wind, or a joint that can be properly re-banded. Pitting, open seams or failed insulation wrap mean relining is the honest answer. We use OEM-compatible parts for structural pieces and won’t patch a liner that’s past saving. Call (866) 937-7635 for an assessment.
A multi-flue cap is usually worth it on an older Venice chimney because it seals every flue opening at once against rain and pest entry, which is where most of the damage in this climate starts. On a chimney with several flues, one cap assembly is simpler than fitting individual caps. Call (866) 937-7635 for a free estimate on your chimney.
Service Areas Near Venice
We serve Venice and the neighboring communities of Brentwood, Westwood, Pacific Palisades, Santa Monica and Beverly Hills, along with Marina del Rey and Mar Vista. If you’re in any of these areas and want DuraFlex service or a Venice chimney inspection, call and we’ll book you in.
Book Your DuraFlex Service in Venice Today
Call (866) 937-7635 for a free estimate on DuraFlex cleaning, inspection or repair in Venice. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect with a camera, show you what we find, and give you a flat price in writing before any work begins.
Written by the team at Brentwood Chimney Sweep.