Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Studio City, CA
We service Gelco chimney caps and venting components across Studio City, from the flat streets off Ventura Boulevard up into the hillside lanes of Fryman Canyon. What makes our Gelco work here different is context: these caps sit on chimneys that already draft poorly and in a neighborhood where ember intrusion is a real concern, so a clogged screen is never just a maintenance note. We’re an independent service provider, not affiliated with or authorized by Gelco, and we tell you plainly when a component is worth servicing and when it isn’t. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Studio City Residents Choose Us for Gelco Service
Gelco makes chimney caps and venting components, and caps are one of the few chimney parts a homeowner actually looks at. That’s why we’re careful with them. Our technicians have up to 12 years of experience, and we work on Gelco caps and dampers often enough to know how stainless screens, mounting legs, and top-sealing gaskets hold up under Southern California sun, dust, and dry wind.
We’re a chimney-only company. Every job we take in Studio City is chimney work, not an add-on to a roofing or HVAC call, so the person evaluating your Gelco cap is the same person who cleans the flue under it and checks the crown above it. From the firebox to the crown, every component inspected and serviced.
Scheduling is straightforward. We give you a flat price for the sweep before we book, and the camera inspection with a photo report comes with it. Nothing gets recommended without evidence you can see for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Studio City
- Screens clogged with creosote and debris. Stainless Gelco cap screens collect creosote flakes and wind-blown leaf litter, and on hillside chimneys that already pull poorly, that restriction tightens the draft further. The fire smolders, and smoldering builds glaze faster than a hot fire ever would.
- Loose mounting legs and set screws. Years of dry Santa Ana wind vibration work cap legs and set screws loose on clay tile flues. A cap that shifts or rattles is no longer sealing out rain, birds, or embers.
- Failed top-sealing damper gaskets. In homes that burn occasionally rather than steadily, top-sealing damper gaskets can stiffen and stick. That lets cold down-drafts in and leaves a gap where embers can enter.
- Rust-through at weld seams. Multi-flue caps on original brick stacks often show corrosion at the weld seams, especially where occasional wood burning has left acidic residue sitting on the metal.
- Settlement cracks at the crown and flashing. The cap is only as sound as what it mounts to. On older Studio City masonry we regularly find mortar crowns and tile flashing that have shifted, so the cap no longer sits level or seals correctly.
Gelco Service in Studio City: What Local Conditions Mean for Your Equipment
Studio City sits in a Very High Fire Hazard Severity Zone in the Hollywood Hills foothills, and that changes what a chimney cap is for. On flatland Los Angeles homes, a cap is mostly a rain and animal guard. Here it’s a wildfire component. A closed-screen Gelco cap with an intact spark arrestor screen is part of how a house resists ember intrusion, and a cap with a torn or clogged screen stops doing that job.
That’s the pairing a generic page misses. Homes up off Laurel Canyon and around Fryman often draft poorly to begin with because of tree canopy and downslope wind coming off the Santa Monica Mountains. Add a clogged screen and you’ve got a chimney that smolders instead of burning clean, which means decades of glazed creosote can build up from a handful of fires a year. When we service a Gelco cap in Studio City, we’re cleaning the screen, checking the mounting hardware, and inspecting the flue for exactly that kind of glaze.
Gelco Models & Products We Service in Studio City
We service Gelco single-flue stainless steel rain caps, multi-flue and multi-port caps, top-sealing damper caps, and spark arrestor screen caps. Those four cover most of what we see on Studio City roofs, from a single clay tile flue on a Tudor cottage to a multi-port cap over an original brick stack.
Parts matter. When the exact fit counts, like a cap matched to a clay tile crown or a multi-flue stack with specific spacing, we source OEM Gelco caps and dampers. Where the spec is equivalent and the value is better, we use quality aftermarket stainless. Our Gelco work is independent, so we’re not tied to one parts path. We repair screens, gaskets, and mounting hardware when the cap body is sound.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Studio City
A standard chimney sweep in Studio City is typically estimated in the low-to-mid $200s, and a camera inspection is usually in the $150 to $250 range. Cap work runs more, depending on the type and mount.

| Service | Typical Estimated Range |
|---|---|
| Chimney sweep (standard flue) | $180 – $340 |
| Camera inspection with photo report | $150 – $250 |
| Gelco cap screen or gasket service | $120 – $280 |
| Single-flue cap replacement | $250 – $550 |
| Multi-flue cap installation | $450 – $950 |
What drives the number is flue length, how much glaze has to come out, roof pitch and access, and whether the cap needs a repair or a full replacement. The free estimate includes the camera inspection, a photo report you keep, and a flat price agreed before we book. The written estimate sets the final price. Call (866) 937-7635 for an exact quote.
Serving Studio City, CA – Our Local Coverage Area
We serve Studio City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Studio City
My Gelco cap screen keeps clogging on my Studio City hillside chimney – is that normal? Yes, and it’s more common on hillside chimneys that draft poorly to begin with. A weak draft means more smoldering, more creosote flakes landing on the screen, and faster clogging. Cleaning the flue to remove the underlying glaze usually slows it down. Call (866) 937-7635 for an estimate.
Does a Gelco chimney cap actually help with wildfire ember intrusion in Studio City? It does, when the screen is intact and fine enough to block embers. In the Very High Fire Hazard Severity Zone, a cap with a torn or clogged screen stops doing that job. We check the screen as part of every cap service.
Can a Gelco multi-flue cap be repaired instead of replaced? Often, yes. If the cap body is sound and only the mounting hardware or a screen has failed, we repair those components. We only recommend full replacement when rust-through or structural failure makes a patch pointless.
Why does my Spanish Revival fireplace smoke even with a Gelco cap installed? The cap is rarely the whole cause. On original brick and clay-tile fireplaces in these cottages, poor draft usually traces to a flue sized for the era, glazed creosote narrowing the passage, or a shifted crown. We camera-inspect to find which. Call (866) 937-7635 to book an inspection.
How often should a Studio City Gelco cap be serviced given our mild burning season? Once a year is a good rhythm even with light use, because our short burning season concentrates creosote instead of spreading it out. A couple of cool-night fires build glaze quickly. Call (866) 937-7635 for an exact quote – estimates are free.
Service Areas Near Studio City
We also service Gelco chimney caps in Studio City and the neighborhoods around it, including Sherman Oaks, West Hollywood, Brentwood, Westwood, and Beverly Hills. Homes in those areas share the same warm, dry climate and much of the same housing stock, and we handle Sherman Oaks and West Hollywood with the same cap and inspection scope.
Book Your Gelco Service in Studio City Today
If your Gelco cap is rattling, clogging, or older than you’d like to think about, we can take a look. We’ll sweep the flue, camera-inspect it, service the cap, and hand you a photo report and a flat price before any work starts. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.