Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Studio City?
Chimney cleaning in Studio City typically costs $185 to $390 for a standard sweep of a wood-burning fireplace, and most homes land around $240 to $290 once the flue is checked and any light soot removed. Gas fireplace service runs lower, usually $120 to $220, because there’s far less creosote to clear. A badly neglected flue, a clogged cap, or a liner that needs resurfacing pushes the job higher, and the written estimate you get before any work starts sets the final price.
Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every job starts with a look at the flue, not a guess over the phone.
Key Takeaways
- A standard wood-burning chimney sweep in Studio City usually runs $185 to $390.
- Gas fireplace cleaning runs $120 to $220, since there’s no creosote buildup to remove.
- Inspections alone cost $125 to $250 and are often what tells you whether a cleaning is even needed.
- HeatShield flue resurfacing, when a liner is deteriorating but not ready for full replacement, usually runs $1,400 to $2,600.
- Estimates are free, and the price is set per job by the written estimate.
Chimney Cleaning Cost Breakdown (2026)
Studio City homes sit mostly in the older, low-slung neighborhoods north of Ventura Boulevard and up into the hills, and a lot of those chimneys were built in the mid-century era, sometimes later with masonry fireplaces added. That shows up in the pricing below. Here’s how the line items shake out for the Studio City market in 2026.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard wood-burning chimney sweep | $185 – $390 | Brush sweep of the flue, removal of soot and creosote, firebox vacuum |
| Gas fireplace cleaning | $120 – $220 | Cleaning of the burner, logs, and glass; no flue brushing for creosote |
| Level 1 inspection (added to a sweep) | $0 – $125 | Visual check of accessible flue and firebox; often bundled free with a cleaning |
| Level 2 inspection (standalone) | $125 – $250 | Camera inspection of the flue; needed for real-estate or insurance requirements |
| Heavy creosote removal (glazed, third-degree) | $390 – $650 | Chemical treatment or extended mechanical cleaning of stubborn buildup |
| Animal nest or debris removal | $95 – $250 | Clearance of bird or squirrel nests, leaves, and blockages from the flue |
| Chimney cap installation | $145 – $325 | Standard stainless or copper cap to keep out animals, rain, and debris |
| Crown repair or rebuild | $425 – $1,500 | Sealing cracks in the crown or rebuilding a failing crown at the top |
| HeatShield flue resurfacing | $1,400 – $2,600 | Resurfacing a deteriorating but structurally sound clay liner |
| Full flue reline (stainless) | $2,400 – $5,200 | New stainless liner installed when resurfacing isn’t an option |
A few things move that number. A first-time cleaning after years of burning pushes toward the top of the sweep range because the creosote can be thick and glazed, which takes longer to clear. A chimney that’s been capped and sealed for a humid summer with birds nesting on top often needs the cap removed and the flue cleared before it’s even cleanable. And a sweep almost always turns up at least one other issue worth looking at, whether it’s a cracked crown, a missing cap, or a liner that’s past its life.
Those secondary fixes are where most of the real spending happens. If your sweep turns up a deteriorated liner, we can often resurface it with HeatShield instead of replacing it outright, which keeps the job in the lower four-figure range instead of the middle one. The written estimate you get up front always sets the final price.
What Affects Chimney Cleaning Pricing in Studio City
No two chimneys clean the same way, and the differences show up in the estimate. These are the factors that push a Studio City job up or down.
- How much creosote has built up. Light soot brushes out in less than an hour. Glazed, hardened creosote takes chemical treatment and a lot more time, and that lands toward the top of the range. Homes that burn a lot of unseasoned wood tend to hit this problem faster.
- Wood-burning versus gas. A gas fireplace cleans down around $120 to $220 since there’s essentially no creosote. A wood-burning fireplace needs the full flue sweep. If you’re unsure what you’ve got, the technician can tell you on arrival.
- The home’s age and chimney construction. The older ranch homes up off Laurel Canyon and along the Studio City hillside were sometimes built with flues that are narrow or oddly angled, which means the brushes have to work harder. Masonry fireplaces from that era also tend to have developed cracks in the mortar over decades of summer heat and mild winters.
- Roof access and pitch. A low, flat-roofed chimney on a single-story home is quick to access. A steep-roofed hillside chimney takes longer to set up on safely. We don’t tack on a premium for access difficulty without saying so in the estimate, and much of Studio City’s flat-to-gently-pitched residential stock keeps that part of the job routine.
- Whether an inspection is needed. A routine cleaning often bundles a visual check. A standalone Level 2 inspection with a camera runs $125 to $250, and it’s the right call if you’re buying a home, your insurer has asked for documentation, or the flue hasn’t been looked at since a previous owner.
- Add-on repairs found during the sweep. A missing cap, a rusted damper, or a cracked crown often surfaces once the flue is clean and the technician can actually see the walls. Those fixes are priced separately and agreed before anyone starts.
Chimney Sweep Around the Studio City Neighborhoods We Work
Studio City stretches from the flats below Ventura Boulevard up toward the hills near Fryman Canyon and out toward the neighborhoods that edge into Valley Village and Sherman Oaks. The housing varies enough that the chimney work does too.
In the flatter ranch-house streets south of the boulevard, chimneys tend to be shorter and more accessible, and a standard sweep is usually straightforward. Up in the hillside streets, the homes are larger, the roof pitch more aggressive, and the chimneys often taller, which adds time to the setup. Fireplaces here burn seasonally, so a fall cleaning is common in both areas. If a chimney has a cap that’s rusted out, replacing it during the same visit means one trip up top instead of two.
If you’re dealing with a chimney that’s overdue for a look, our Brentwood Chimney Sweep team can schedule a sweep and walk the whole flue top to bottom in one visit. We only do chimneys, so the cleaning and any repair found along the way get handled by the same set of hands.
How to Save on Chimney Cleaning
Cleaning a chimney isn’t the kind of expense where shopping on price alone works. A cheap sweep that leaves glazed creosote on the walls is money spent and a hazard still in place. That said, there are ways to keep the bill reasonable.
- Book before the fall rush. Cleaning is a seasonal job, and most homeowners think about it when the first cold snap hits. Scheduling the inspection or sweep before that demand builds means the work gets done without a scramble, and the same job costs the same either way since pricing is per job.
- Bundle the inspection with the sweep. Many cleanings include a Level 1 visual check at no extra charge, so ask about that when you call. A standalone inspection is $125 to $250, and bundling avoids paying for it separately.
- Fix a cracked crown early. Crown repair runs $425 to $1,500. Left alone, water gets into the masonry, and that turns into a repair job far larger than a crown. The mild Studio City climate is gentler than most, but the late-season rain that occasionally arrives still finds every crack.
- Ask about HeatShield before you replace. A worn flue liner doesn’t always need a full stainless reline. When the original clay liner is still structurally sound but deteriorating, resurfacing can save hundreds or more compared to replacement. Ask specifically whether resurfacing fits your flue rather than assume the reline is the only option.
- Get the free estimate in writing. A clear estimate that breaks out cleaning, inspection, and any repair found is the best way to keep the final price aligned with what you expected. The written estimate sets the final price. Call (866) 937-7635 to get one.
What Happens When You Call
When you call, we ask a few questions to make sure the estimate is useful: wood-burning or gas, when the chimney was last cleaned, and whether you’ve noticed any smoke backing up, a smell from the fireplace, or a cap that looks damaged. That gives us a solid starting picture. A technician then visits, inspects the flue, and lays out what needs doing and what it costs before any work begins.
The inspection comes first for a reason. It’s where problems get caught before they turn into fire hazards or expensive structural repairs. From the firebox to the crown, every component gets a look, and you get a straight answer about what’s fine, what needs cleaning, and what needs fixing. If we find a liner that’s a candidate for HeatShield resurfacing, that’s a conversation we have up front, not after we’ve already started.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often possible when you call earlier in the day.
FAQs – Chimney Cleaning Cost
How much does a chimney sweep cost in Studio City?
A standard wood-burning chimney sweep in Studio City usually costs $185 to $390, with most homes falling around $240 to $290. Gas fireplaces clean for less, typically $120 to $220, since there’s no creosote to remove. The written estimate you get before work starts sets the final price. Call (866) 937-7635 for a free quote.
Is a chimney inspection required for a home sale or insurance in Studio City?
A Level 2 inspection runs $125 to $250 and is the type most real-estate transactions and insurance requirements ask for, since it includes a camera view of the flue. A routine cleaning often bundles a simpler visual check at no extra cost, but the camera inspection is a separate service. Call (866) 937-7635 to schedule one.
How often should I have my chimney cleaned in Studio City?
Most wood-burning fireplaces need cleaning roughly once a year, or sooner if you burn frequently. A gas fireplace can go longer between cleanings but still benefits from an annual check. A cleaning typically runs $185 to $390, and catching a creosote problem early keeps you out of the $390 to $650 heavy-removal range. Call (866) 937-7635 to book.
Can I get a free estimate for chimney cleaning in Studio City?
Yes, estimates are free and the price is set per job by the written estimate. A standard cleaning ranges $185 to $390, and any add-on repair found during the inspection is quoted before anyone starts. Call (866) 937-7635. We answer 24/7.
What if my flue liner is damaged during cleaning?
A liner that’s deteriorating but structurally sound can often be resurfaced with HeatShield for roughly $1,400 to $2,600, compared to a full stainless reline at $2,400 to $5,200. The inspection tells you which option fits your flue. Call (866) 937-7635 for an assessment and a free estimate.
Can you come out today?
Same-day service is often possible when you call earlier in the day; a standard cleaning runs $185 to $390 and any repair found is quoted first. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
If your chimney hasn’t been cleaned or inspected in a while, or you’ve noticed smoke or odors backing into the room, that’s worth a look sooner rather than later. Our technicians have up to 12 years of experience, and we work with professional-grade products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Give Brentwood Chimney Sweep a call at (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate always sets the final price.
Written by the team at Brentwood Chimney Sweep.
Pricing reflects the Studio City market as of 2026. Brentwood Chimney Sweep offers free estimates – call (866) 937-7635.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Rohan Patel"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Alma Reyes"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Marisol Delgado