Chimney Liner & Rebuild Cost in Brentwood - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 937-7635

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 937-7635

How Much Does Chimney Liner & Rebuild Cost in Brentwood?

Chimney liner repair in Brentwood typically costs $650 to $1,900, and a full stainless liner replacement usually runs $3,200 to $7,400. A partial chimney rebuild generally lands between $2,800 and $9,500, while a full rebuild from the roofline up starts around $11,000 and climbs past $28,000 for tall, complex stacks. The written estimate sets the final price for your specific flue and chimney.

Those ranges cover the work most Brentwood homeowners actually face: relining an older flue, parging a pitted liner with HeatShield resurfacing, or rebuilding the crown and upper courses that take the most weather. We only do chimneys, and we do them completely, so one call covers the inspection, the sweep, and the structural repair instead of sending you to a second contractor halfway through.

Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Chimney Liner & Rebuild Cost Breakdown (2026)

Here’s how the numbers break down line by line for the Brentwood market. Each figure is a typical estimated range for residential work, and the free written estimate you receive sets the final price.

Work item Typical estimated cost in Brentwood (2026)
Chimney inspection (camera and visual, standalone) $250 – $500
Standard chimney sweep $180 – $350
HeatShield flue resurfacing (per flue, when a full reline isn’t needed) $650 – $1,900
Stainless steel liner replacement, wood-burning flue $3,200 – $7,400
Insulated liner with new top plate and cap $4,100 – $8,600
Chimney cap installation $250 – $650
Crown repair or rebuild $1,100 – $3,400
Partial chimney rebuild (upper courses, roofline area) $2,800 – $9,500
Full chimney rebuild, roofline to crown $11,000 – $28,000+
Firebox or damper repair $400 – $2,200

What pushes a job toward the top of a range? Flue height, how hard the chimney is to reach from the roof, whether the existing liner has to be broken out first, and how much hidden damage turns up once the flue is opened. A straight, accessible flue with a sound crown costs less than a tall stack with a crumbling crown, a settled cap, and a liner that’s been degrading for years. We build the estimate from what we actually see during the inspection, not from a phone description.

The bigger variable is often the choice between repair and replacement. When the flue walls are pitted but still structurally sound, HeatShield resurfacing can restore the liner without a full reline, and that keeps the job in the $650 to $1,900 range instead of the $3,200 to $7,400 range. Our technicians have up to 12 years of experience applying these systems, and HeatShield is a proprietary product that needs specific application skill, so it isn’t a repair every chimney company offers. It’s the right fix for the right flue, and a full replacement when the liner is beyond saving.

We source professional-grade materials from brands chimney specialists actually use: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. The point isn’t the name on the box. It’s that a liner rated for the temperatures your firebox produces, installed correctly, is the difference between a repair that holds and one that fails in a few seasons.

Want to talk it through?Free estimate, price agreed before work starts
Call (866) 937-7635

What Affects Chimney Liner & Rebuild Pricing in Brentwood

  • Flue height and roof access. A taller chimney means more liner, more staging, and more time on the roof. Brentwood homes with two-story stacks or steep-pitch roofs sit at the higher end of the liner range because access takes longer and the work carries more safety requirements.
  • Liner material and insulation. A basic stainless liner costs less than an insulated one with a new top plate and cap. Insulation matters in an exterior chimney, where an uninsulated flue stays cooler and drafts poorly. The upgrade is worth pricing into the estimate from the start.
  • Condition of the crown and cap. A cracked crown lets water into the masonry, and water damage is the leading cause of chimney deterioration in this climate. If the crown and cap are already failing, expect to add $1,100 to $3,400 for crown work and $250 to $650 for a cap, done as part of the same visit.
  • Type of fuel and appliance. A wood-burning fireplace, a gas insert, and a freestanding stove each need a different liner size and rating. Matching the liner to the appliance affects both material cost and the time required to size and fit it correctly.
  • Age and history of the chimney. Older Brentwood masonry chimneys, especially those built before modern liner codes, often need the original clay tile broken out before a new liner goes in. That demolition step adds labor to the total.
  • Local code and permit requirements. Most cities require a permit for a chimney rebuild, so ask your city’s building department what applies to your project. Permit costs and inspection steps get added to the estimate up front, not discovered later.

Brentwood’s dry summers and mild winters are gentle on masonry compared to harsher climates, but the region’s fire season is the reason we take liner integrity seriously. A sound liner keeps heat and creosote inside the flue and away from the framing. When it’s compromised, that’s the hazard worth catching in an inspection and fixing before it becomes a fire risk.

How to Save on Chimney Liner & Rebuild in Brentwood

The most reliable way to lower the bill is to catch the problem early. A chimney inspection costs $250 to $500 and can spare you a rebuild that runs into five figures. If a flue is only mildly deteriorated, HeatShield resurfacing at $650 to $1,900 can postpone or eliminate a full liner replacement. Those are real savings for the right candidate, and the inspection is what tells you whether you qualify.

A few practical moves:

  • Bundle the crown and cap with the liner work. Doing both during one visit saves the cost of a second trip up the roof. A new cap and repaired crown also protect the liner you just paid for, so the money works twice.
  • Fix the water problem before it travels. A cracked crown lets water soak the masonry, and wet masonry leads to spalling and eventually structural failure. Repairing the crown at $1,100 to $3,400 now is a fraction of a full rebuild at $11,000 and up.
  • Get the inspection first, not the quote over the phone. No honest estimate can be built without seeing the flue. A free estimate from us starts with an inspection so the number you get matches the work in front of us.
  • Keep up annual sweeping. A standard sweep at $180 to $350 clears creosote before it does damage, and it’s the cheapest way to avoid a liner repair.
  • Ask about the repair-versus-replace line in writing. A good estimate tells you why one option costs less than the other, not just a total. That way you’re deciding with information, not pressure.

We do full-service chimney work, so the inspection, the sweep, the cap and crown, the fireplace repair, and the structural repair all come from one specialist. You never get handed off to a second contractor to finish a job we started. From the firebox to the crown, every component gets inspected and serviced. You can read more about chimney liner & rebuild work and how we scope it as a complete project.

Estimates are free, and the written price is the final word. Call (866) 937-7635 to book one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 937-7635

FAQs – Chimney Liner & Rebuild Cost

How much does chimney liner replacement cost in Brentwood?

Chimney liner replacement in Brentwood typically costs $3,200 to $7,400 for a wood-burning flue, and $4,100 to $8,600 when you add insulation, a new top plate, and a cap. Flue height, access, and whether the old tile has to be removed move the price within that range. Call (866) 937-7635 for a free estimate built from an inspection of your specific flue.

Is it cheaper to repair or replace a chimney liner?

In most cases, repair is cheaper: HeatShield flue resurfacing runs $650 to $1,900 versus $3,200 to $7,400 for a full liner replacement. The catch is that resurfacing only works when the existing liner is still structurally sound. If the flue walls are badly damaged, replacement is the only safe option. An inspection tells you which side of that line you’re on. Call (866) 937-7635 for a free estimate.

How much does a chimney rebuild cost in Brentwood?

A partial chimney rebuild in Brentwood typically costs $2,800 to $9,500, and a full rebuild from the roofline to the crown runs $11,000 to $28,000 or more. Height, complexity, and how much masonry has to come out are the main drivers. Most cities require a permit for a rebuild, so ask your city’s building department what applies. Call (866) 937-7635 for a free estimate.

Can you come today?

Same-day service is often available, and a standalone chimney inspection starts at $250 to $500. We answer the phone around the clock; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 937-7635 and we’ll find you the soonest slot. Estimates are free.

Do I need a permit to rebuild a chimney in Brentwood?

Most cities require a permit for a chimney rebuild, and permit and inspection costs typically add a few hundred dollars to the estimate. Requirements vary by jurisdiction, so check with your city’s building department before scheduling the work. We’ll walk you through what your project needs as part of the free estimate. Call (866) 937-7635.

Book a Free Chimney Liner & Rebuild Estimate in Brentwood

Whether you’re facing a full reline, a HeatShield resurfacing, or a rebuild of the crown and upper courses, the number to plan around comes from an in-person look at your flue. We only do chimneys, which means every dollar in the estimate goes to the trade we practice. Our technicians have up to 12 years of experience, we work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and the estimate is free. Call (866) 937-7635 and we’ll get you scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Brentwood Chimney Sweep.

Pricing reflects the Brentwood market as of 2026. Brentwood Chimney Sweep offers free estimates – call (866) 937-7635.

What Our Customers Say

★★★★★ 4.9 from 9+ reviews

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Rohan Patel

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

- Alma Reyes

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

- Marisol Delgado
Need Chimney Cleaning help in Brentwood? Licensed & insured · free written estimates
Call (866) 937-7635

Request a Free Estimate

Tell us what's going on in Brentwood. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Chimney Sweep BrentwoodChimney Sweep WestwoodChimney Sweep Pacific PalisadesChimney Sweep Santa MonicaChimney Sweep Beverly HillsChimney Sweep VeniceChimney Sweep Mar VistaChimney Sweep West HollywoodChimney Sweep Culver CityChimney Sweep Sherman OaksChimney Sweep Marina del ReyChimney Sweep EncinoChimney Sweep Studio CityChimney Sweep Ladera HeightsChimney Sweep TopangaChimney Sweep TarzanaChimney Cap & Crown BrentwoodChimney Cap & Crown WestwoodChimney Cap & Crown Pacific PalisadesChimney Cap & Crown Santa MonicaChimney Cap & Crown Beverly HillsChimney Cap & Crown VeniceChimney Cap & Crown Mar VistaChimney Cap & Crown West HollywoodChimney Cap & Crown Culver CityChimney Cap & Crown Sherman OaksChimney Cap & Crown Marina del ReyChimney Cap & Crown EncinoChimney Cap & Crown Studio CityChimney Cap & Crown Ladera HeightsChimney Cap & Crown TopangaChimney Cap & Crown TarzanaFireplace Repair BrentwoodFireplace Repair WestwoodFireplace Repair Pacific PalisadesFireplace Repair Santa MonicaFireplace Repair Beverly HillsFireplace Repair VeniceFireplace Repair Mar VistaFireplace Repair West HollywoodFireplace Repair Culver CityFireplace Repair Sherman OaksFireplace Repair Marina del ReyFireplace Repair EncinoFireplace Repair Studio CityFireplace Repair Ladera HeightsFireplace Repair TopangaFireplace Repair TarzanaChimney Repair BrentwoodChimney Repair WestwoodChimney Repair Pacific PalisadesChimney Repair Santa MonicaChimney Repair Beverly HillsChimney Repair VeniceChimney Repair Mar VistaChimney Repair West HollywoodChimney Repair Culver CityChimney Repair Sherman OaksChimney Repair Marina del ReyChimney Repair EncinoChimney Repair Studio CityChimney Repair Ladera HeightsChimney Repair TopangaChimney Repair TarzanaChimney Inspection BrentwoodChimney Inspection WestwoodChimney Inspection Pacific PalisadesChimney Inspection Santa MonicaChimney Inspection Beverly HillsChimney Inspection VeniceChimney Inspection Mar VistaChimney Inspection West HollywoodChimney Inspection Culver CityChimney Inspection Sherman OaksChimney Inspection Marina del ReyChimney Inspection EncinoChimney Inspection Studio CityChimney Inspection Ladera HeightsChimney Inspection TopangaChimney Inspection Tarzana
Call Now - We Answer 24/7