Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Brentwood?
Chimney repair in Brentwood typically costs $185 to $350 for a minor fix like a cracked crown or a loose cap, and $650 to $2,400 for a full flue liner repair or reline. Structural masonry repairs run higher, usually $1,200 to $4,500 depending on how much of the stack is involved. These are typical estimates for the local market; the written estimate from the technician who inspects your chimney sets the final price.
We only do chimneys, and that focus matters when you’re reading a quote. A generalist who splits time between roofs, HVAC and chimneys reads a chimney the same way every time. A specialist knows how a cracked crown in the East Bay’s dry summers and wet winters actually fails, and what the fix costs to hold. Our technicians have up to 12 years of experience, and we work with professional-grade materials from brands like HeatShield, DuraFlex, Olympia Chimney, Gelco, Famco and Copperfield.
Key Takeaways
- Minor repairs (crown, cap, flashing) in Brentwood run about $185 to $350.
- Flue liner repair ranges from $650 to $2,400; HeatShield resurfacing often costs less than a full reline.
- Masonry rebuilds and structural repairs run $1,200 to $4,500.
- Inspections are $150 to $300 and often catch the problem before it grows. Call Brentwood Chimney Sweep for a free estimate.
- Costs climb with height, access, and whether the damage reaches the structural masonry or just the outer layer.
Chimney Repair Cost Breakdown (2026)
Here’s how the numbers land across the repairs we see most often in Brentwood. Each line is a typical estimated range, not a quote. The written estimate you get after inspection is the real number.
| Repair | Typical Estimated Range | What It Covers |
|---|---|---|
| Chimney cap replacement | $185 – $450 | Stainless or copper cap, mesh, securing to flue |
| Crown repair | $250 – $700 | Patching cracks or rebuilding the crown with proper slope |
| Flashing repair or replacement | $300 – $850 | Resealing or re-flashing where the chimney meets the roof |
| Flue tile crack repair (minor) | $200 – $500 | Small joint or tile repairs short of resurfacing |
| HeatShield flue resurfacing | $650 – $1,600 | Resurfacing a deteriorating liner without a full reline |
| Full flue liner replacement (DuraFlex) | $1,400 – $2,400 | Stainless liner installed for long-term service |
| Crown rebuild with masonry | $900 – $1,800 | Removing failed crown and pouring or laying a new one |
| Masonry repair (spalling, brick, mortar) | $1,200 – $4,500 | Replacing damaged brick and joints up the stack |
| Fireplace repair (firebox, damper, surround) | $300 – $1,800 | Firebox repointing, damper replacement, smoke chamber repair |
| Chimney inspection (standalone) | $150 – $300 | Full visual inspection, often required for real estate or insurance |
What drives the number up or down? The biggest factor is whether the damage is cosmetic or structural. A crown crack that lets water in is a small fix, but leave it for a few seasons and water gets behind the brick, mortar goes soft, and the repair moves from hundreds into the thousands. A full liner replacement costs more than HeatShield resurfacing, but not every flue qualifies for resurfacing; the liner has to be sound enough to hold the coating. Access is the other big one. A chimney on a steep roof or crowded by trees takes more time to reach and work safely.
If you’re weighing options, start with a chimney repair assessment before anything gets rebuilt. About half the calls we get that sound structural turn out to be one or two components that failed – a cap, a crown, a flashing leak – once we’re actually on the roof.
What Affects Chimney Repair Pricing in Brentwood
- Chimney height and access. A two-story stack or one tucked against a tree line adds time and equipment to any repair. Shorter, clear chimneys come in at the low end.
- Whether the liner is failing. Cracked flue tiles are a fire hazard, and they change the whole cost picture. A sound liner allows HeatShield resurfacing at the lower end; a badly deteriorated one needs a full reline with DuraFlex or Olympia Chimney at the upper end.
- Water damage from a failed crown or cap. Brentwood’s dry summers followed by winter rain put a lot of stress on masonry. Every crack in the crown is a path for water. If water has gotten into the brick, a simple patching job can become a masonry repair.
- Material type. A stainless cap costs less than copper. A standard DuraFlex liner costs less than a custom-fitted system. Repairs using Gelco, Famco or Copperfield components vary based on what’s actually on your chimney.
- Extent of masonry damage. One spalling brick is a small job. A section of mortar joints gone soft from repeated water intrusion is not. Brick and stone work is the most labor-intensive repair we quote.
- Whether inspection is bundled into the repair visit. A standalone inspection is $150 to $300, but when it’s part of a repair estimate, that cost typically folds into the job quote.
The local climate is a factor worth understanding. Brentwood is dry through summer and gets steady rain in winter. Masonry expands and contracts with moisture and temperature swings. A crown with proper slope sheds water. A flat, cracked crown traps it. Over time that trapped water finds its way into the brick and flue, and what read as a $300 patch becomes a $1,500 repair. The same is true at the flashing line, which is the second most common entry point we find.
How to Save on Chimney Repair
The best saving in chimney work is catching the problem during a scheduled inspection rather than after a leak shows up on the ceiling. A $150 inspection that finds a $250 crown crack is a lot cheaper than the masonry repair that follows a winter of water intrusion. Beyond that:
- Book the inspection before the damage compounds. Caught early, a failing crown is a patch; caught late, it’s a rebuild. The difference is usually hundreds, often over a thousand.
- Ask about HeatShield resurfacing. If your liner is deteriorating but not yet failed, resurfacing can cost half of what a full reline would. It’s not right for every flue, but it’s worth asking about before you sign off on a replacement. This is one of the reasons we carry HeatShield: it gives us a repair option most local competitors can’t offer.
- Fix the cap and crown first. The leading cause of chimney water damage is water getting in at the top. A cap and a sound, properly sloped crown keep hundreds in masonry repair out of your future.
- Get the inspection in writing. A written inspection with photos tells you what’s failing now, what’s wearing, and what can wait. That lets you prioritize the spending instead of fixing everything at once.
- Request a free estimate. Our estimates cost nothing and come with a clear written scope. Call (866) 937-7635 to schedule one.
We don’t discount to win a job and then make it back on scope changes. We price the actual repair and you decide. From the firebox to the crown, every component gets inspected and serviced before we quote a number. That’s how we protect the estimate from changing after the work starts.
FAQs – Chimney Repair Cost
What’s the average cost of chimney repair in Brentwood?
Most chimney repairs in Brentwood fall between $185 and $850, with the average landing around $350 to $500 for the minor fixes like caps, crowns and flashing. Structural repairs and full liner replacements run $1,200 to $4,500. Call (866) 937-7635 for an exact quote – estimates are free.
Is it cheaper to repair or replace the flue liner?
Repair is usually cheaper when the liner is only moderately deteriorated: HeatShield resurfacing at $650 to $1,600 typically costs less than a full reline at $1,400 to $2,400. Once the liner tiles are cracked or displaced through the wall, replacement is the only safe option. We answer 24/7 – call (866) 937-7635 and we’ll tell you which applies based on an inspection.
How much does a chimney crown repair cost in Brentwood?
Crown repair ranges from $250 to $700 for cracks and patching, and $900 to $1,800 for a full rebuild where the old crown has failed and needs replacing. A rebuilt crown with proper slope sheds water and costs less than the masonry repair that follows if the crack is left alone. Call (866) 937-7635 for an exact quote – estimates are free.
Can you fix my chimney the same day?
Some repairs, like cap replacement and minor crown patching, can be scheduled quickly, often same day when parts are on hand. Larger liner and masonry repairs are quoted after an inspection and scheduled once you approve. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 937-7635.
Does a chimney inspection cost extra?
A standalone chimney inspection in Brentwood runs $150 to $300, and it’s a service worth doing even when nothing seems wrong – especially for real estate transactions, insurance requirements or annual safety checks. When the inspection is part of a repair visit, it’s typically rolled into the repair quote. Call (866) 937-7635 to book an inspection.
Why Choose Brentwood Chimney Sweep for Repair Pricing
We only do chimneys. Our five services cover the whole chimney – sweep, cap and crown, fireplace repair, chimney repair and inspection – and every job is priced by scope, not by what we think we can get. That’s what lets us quote a HeatShield resurfacing when a competitor would jump straight to a full reline. It’s also what lets us tell you which repairs can wait and which can’t. The chimney cap and crown work we do is specifically aimed at the water damage that causes most structural chimney repairs in the first place. Get that first and a lot of the bigger repair costs never happen.
Our technicians have up to 12 years of experience, and we install products from HeatShield, DuraFlex, Olympia Chimney, Gelco, Famco and Copperfield. The brands matter because installed correctly and matched to the right flue, they perform for years. We back every repair with a satisfaction guarantee, and a written estimate means the number doesn’t change unless you approve a change in scope.
Contact Us for a Free Chimney Repair Estimate
If you’re not sure whether your chimney needs a repair or just a look, call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, tell you what’s failing, what can wait, and what a repair costs in plain numbers before any work starts. The estimate is free and the price is set in writing.
Pricing reflects the Brentwood market as of 2026. Brentwood Chimney Sweep offers free estimates – call (866) 937-7635.
Written by the team at Brentwood Chimney Sweep.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Rohan Patel"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Alma Reyes"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Marisol Delgado