Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Brentwood Homeowners
Chimney repair in Brentwood usually starts with something small: a hairline crack in the mortar, a crown that’s pulling away from the flue, a stain on the ceiling near the chimney chase. Left alone, those small things turn into water damage, rusted dampers, and a flue that no longer vents safely. Our technicians have up to 12 years of experience, and we only do chimneys – no roofing, no HVAC, no general handyman work. From the firebox to the crown, every component gets inspected and serviced by the same trade. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Repair Service Includes
Mortar Repointing
Mortar joints between the bricks take the brunt of weather and settling, and once they crack or erode, water finds the gaps. Repointing means grinding out the failed mortar and packing fresh material into the joint so the brickwork holds together. We match the mortar to the existing color and hardness, since a too-hard mix can spall the brick around it. Brentwood summers dry things out fast, and mortar that’s been through a few hot cycles is usually the first place we look.
Spalling Brick Repair
Spalling is when the face of a brick flakes off or pops away – you’ll see it as rough, pitted surfaces or brick dust on the roof or crown. It happens when moisture gets trapped inside the brick and expands on its way out, so a single spalled brick is often a sign water is getting somewhere it shouldn’t. We replace the damaged bricks with compatible units, then find and fix the moisture source so the new brickwork isn’t hit by the same problem.
Chimney Waterproofing
A brick chimney is porous. Without a breathable waterproofing layer, water moves through the masonry, gets behind the flashing, and shows up as interior staining. We apply a vapor-permeable waterproofing product from a brand like Copperfield, which keeps liquid water out while letting trapped moisture escape. It’s one of the least expensive repairs on this list and one of the most effective at preventing the rest of them.
Flashing Repair
Flashing is the metal that seals the join between the chimney and the roof, and when it’s loose, rusted, or installed incorrectly, water runs straight down the chimney chase. We inspect the flashing at the roof line, reseal or replace the sections that have failed, and check the counter-flashing that ties into the masonry. Most interior leaks we trace near a chimney come back to the flashing, not the brickwork itself.
Chimney Rebuilding
When the damage above the roof line has gone too far – widespread spalling, a crumbling crown, joints too far gone for repointing – we rebuild the affected section from a sound starting point. Rebuilding can mean the top courses, the crown and cap assembly, or a larger portion of the above-roof structure. We only recommend it when the evidence supports it, and we walk you through what we found before any material is ordered.
Tuckpointing
Tuckpointing is the finish work that refines a repointed joint – a fine, matched mortar line that tightens the appearance of the brickwork and seals minor surface fissures. It’s often done alongside repointing, not instead of it. We use it where joints have been ground out and refilled and the surface needs the final seal.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
Our product knowledge is part of the repair. Famco parts show up in a lot of the caps and top-sealing systems we work with, and knowing how those components fit means we can repair around what’s already there instead of tearing it out. DuraFlex flexible liners appear in relined chimneys, and when one of those needs attention at a joint or fitting, we know how the liner is supposed to sit inside the flue. HeatShield is the system we use for flue resurfacing, a proprietary method that requires specific product knowledge and application skill, and it lets us restore a deteriorating liner without a full replacement in the right circumstances.
Copperfield waterproofing products come up often on the masonry side, since they’re formulated to protect brick without sealing it shut. Whether your chimney has a component from one of these makers or any other make, we can help. If we don’t recognize a part on sight, we identify it before recommending anything – no guessing, no upselling on components that are working fine.
Signs You Need Chimney Repair Right Now
- Crumbling mortar between the bricks. If you can scratch the joint with a key and sand falls out, the mortar has failed and water is getting in. Repointing at that stage is a modest repair; ignore it and the brickwork starts to spall and the job grows.
- White staining or flaking on the chimney exterior. That chalky residue is efflorescence, a sign moisture has moved through the masonry. It often means the crown, flashing, or waterproofing has a gap that needs sealing before the damage goes deeper.
- Water stains on the ceiling or chimney chase. Interior staining points to a leak at the flashing, crown, or a crack in the masonry above. It’s worth a look now rather than after the next rainy season, because the drywall and framing behind the stain may already be wet.
- A damper that won’t close or a firebox with cracks. A damaged damper or cracked firebox panel changes how the fireplace drafts and how safely it contains the fire. Repairs here protect the rest of the chimney from heat and smoke damage.
- Loose or missing chimney cap and crown. The crown is the concrete top that sheds water off the chimney, and the cap keeps rain and animals out of the flue. When either one is cracked or missing, water goes straight down the flue and every component below is at risk.
Our Chimney Repair Process – Step by Step
- 1
We start with an inspection, not an estimate. Before we quote a repair, we look at the whole chimney: the firebox, damper, flue, crown, cap, flashing, and the exterior masonry. We run a camera down the flue so we can see the liner condition from the inside, not just guess from the top.
- 2
You see the evidence. We show you photos and the camera footage of what we found and explain what each issue means. Nothing gets recommended without evidence you can look at yourself, and we tell you plainly when a repair can safely wait.
- 3
You get a written, flat-price estimate. The estimate is free, itemized, and agreed before any work is booked. The written estimate sets the final price, so there are no surprises when the job is done.
- 4
We do the repair with the right materials. Mortar matched to the existing brick, flashing that actually seals the roof join, waterproofing that breathes, and liner products from the brands chimney specialists use – DuraFlex and HeatShield among them, depending on what the flue needs.
- 5
We check our own work. After the repair, we confirm the chimney is watertight, the flue is clear, and the fireplace drafts correctly. You get a photo report of the finished work, and if something isn’t right, we come back and fix it under our satisfaction guarantee.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Brentwood?
Chimney repair in Brentwood typically runs from a few hundred dollars for a targeted fix to several thousand for structural work above the roofline. The range depends on how much of the chimney is affected, how high the work is, and the materials involved. Here’s how the common scenarios break down.
| Repair | Typical Estimated Range | What Drives the Price |
|---|---|---|
| Mortar repointing (partial) | $300 – $900 | Number of joints, height, access |
| Tuckpointing (finish work) | $250 – $600 | Area treated, whether done with repointing |
| Spalling brick replacement | $400 – $1,200 | Number of bricks, matching and sourcing |
| Chimney waterproofing | $350 – $800 | Surface area, product used, prep needed |
| Flashing repair | $300 – $750 | Roof pitch, extent of resealing or replacement |
| Chimney rebuild (upper section) | $2,500 – $6,000+ | Height removed, crown and cap included, access |
A few things push the number up: a steep roof, a chimney that’s hard to reach, and damage that’s spread below the roofline. You avoid overpaying by getting the inspection first, seeing the camera evidence yourself, and comparing the written line items – not by taking the lowest bid on a repair you haven’t been shown a reason for. Our estimate is free, itemized, and sets the final price by written agreement before we book the job.
Chimney Repair Near Brentwood – Our Service Area
We work throughout Brentwood and the surrounding westside neighborhoods. Homeowners in Westwood and Pacific Palisades call us for chimney repair, and we also cover Santa Monica, Beverly Hills, Venice, Mar Vista, West Hollywood, Culver City, Sherman Oaks, Marina del Rey, and Encino. If you’re not sure whether you’re in range, call and we’ll confirm. See our full Brentwood Chimney Sweep service offering for the complete picture, or read more about chimney repair in Pacific Palisades.
Serving Brentwood, CA – Our Local Coverage Area
We serve Brentwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Brentwood
Chimney repair is the work of restoring the structure and components of a chimney so it vents safely and sheds water properly – from repointing mortar and replacing spalled brick to fixing flashing, waterproofing the masonry, and rebuilding damaged sections above the roof. It’s different from a sweep, which cleans the flue, and different from a fireplace repair, which focuses on the firebox and damper. A proper inspection tells you which of these you actually need.
Most repairs take less than a day – repointing, flashing repair, and waterproofing are typically completed in a few hours. A chimney rebuild takes longer, often a day or more depending on how much of the structure is being replaced and what the roof access looks like. We confirm the expected timeline in the written estimate so you can plan around it.
Chimney repair in Brentwood typically runs about $300 – $900 for repointing, $350 – $800 for waterproofing, and $2,500 – $6,000+ for a rebuild of the upper chimney section. The written estimate sets the final price, and it’s based on what the inspection actually finds – not a phone quote. Call (866) 937-7635 for an exact quote; estimates are free.
Yes. We work with HeatShield flue resurfacing and DuraFlex flexible liners, and we can evaluate whether resurfacing is right for your flue or whether a liner replacement is needed. HeatShield is a proprietary system that requires specific application skill, and it can save you the cost of a full reline when the liner is still sound enough to resurface. We tell you which option the camera evidence supports.
Same-day repair is often possible depending on the scope and parts needed. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening.
Yes. We stand behind our repair work with a satisfaction guarantee: if something we fixed isn’t right, we come back and make it right. Our technicians have up to 12 years of experience, and we use professional-grade materials from brands like Famco and Copperfield so the repair holds.
Clear the area around the fireplace and the hearth so we can access the firebox and damper, and make sure we can get to the roof access point. If you’ve noticed leaks, drafts, or stains, point them out – details help us match our findings. We bring the camera equipment and inspection tools, so you don’t need to prepare anything on the chimney side. For annual maintenance, book a chimney inspection, and read more about chimney repair for a closer look at the process.
Schedule Your Chimney Repair Service in Brentwood Today
If something about your chimney’s structure has changed – a crack, a leak, a crumbling joint, a crown that’s pulling loose – now is the time to have it inspected and repaired, before the problem spreads. Call (866) 937-7635 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Nothing we recommend is without camera evidence you can see for yourself.
Written by the team at Brentwood Chimney Sweep.