Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Santa Monica, CA
We provide independent Gelco service across Santa Monica, from the Alphabet Streets to Ocean Park. The one thing that sets our Gelco work apart here is salt: caps and dampers on this side of town take a beating from onshore air that same-era chimneys a few miles inland never see. We are an independent shop, not affiliated with or authorized by Gelco, so our advice follows what your flue actually needs. Our technicians have up to 12 years of experience. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Santa Monica Residents Choose Us for Gelco Service
Gelco hardware shows up on a lot of fireplaces around Santa Monica. Caps, dampers, door sets, screen assemblies – we work on all of them and know how each one tends to age in coastal conditions. That matters more than brand loyalty. Our technicians have up to 12 years of experience reading the difference between a Gelco part that has failed and a chimney that was never drafting right to begin with.
We also do something most generalists don’t bother with: we match the part to the flue. A cap that’s slightly undersized for a clay tile will rock in the wind and pull the tile loose over time. A damper frame that doesn’t fit the firebox opening leaks no matter how good the steel is. So we measure, then we choose. Genuine Gelco parts go on when they’re the right size. When they’re not, or when a unit is long discontinued, we source a correctly sized quality stainless alternative instead of forcing a fit.
Chimney work is all we do. No roofing, no HVAC, no handyman add-ons. From the firebox to the crown, every component gets inspected and serviced by the same trade. If you’ve had a sweep tell you one thing and a roofer tell you another, you know why that focus matters.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Santa Monica
Here’s what we actually find on Gelco-equipped chimneys around Santa Monica, and why it happens here.
- Powder-coated caps corroding on the seaward face. The coating lifts first on the ocean side, then the steel rusts through right at the mounting screws. Salt-laden onshore breezes drive this. A cap that looks fine from the driveway can be paper-thin where it’s anchored.
- Top-mount cap screens clogging with sticky soot. Coastal humidity makes creosote tacky rather than flaky, so it clings to the mesh along with a salt film. Draft drops, and embers sit against the screen instead of drawing up and out.
- Damper frames seizing at the pivot. The marine layer keeps fireboxes damp through the off-season, and a Gelco damper plate that sat closed all summer can rust solid at the hinge. Once it won’t close flush, your chimney quietly leaks conditioned air all year.
- Slip-in caps loosening on eroded crowns. On original 1920s to 1940s clay flue tiles, the mortar crown often isn’t as sound as it looks. A cap that rocks in the wind will eventually pull the tile with it. We check the crown before we re-seat anything.
- Decorative door and screen hardware failing at the hinges. Salt air pits the hardware and the doors stop sitting square. Usually a repair rather than a replacement, but only if the frame is still true.
Gelco Service in Santa Monica: What Local Conditions Mean for Your Equipment
In the Alphabet Streets and north of Montana, the mortar joints on original 1920s brick chimneys are frequently eroded into recessed hollows by decades of salt air. Same-era chimneys a few miles inland in West LA almost never show that degree of joint loss. West of Lincoln, the brick stays wetter and the joints weather differently than they do east of it.
What that means for a Gelco cap or damper is practical. The cap has to anchor into something sound. If the mortar around the flue tile has hollowed out, a top-mount cap bolted to a soft crown won’t hold through a windy season, and the fasteners work loose faster than they would on a crisp inland chimney. Same story with dampers: an eroded crown lets moisture into the flue, the firebox stays damp longer, and the damper frame corrodes at the pivot sooner. So on pre-1950s Santa Monica chimneys, we inspect the masonry and crown first, flag any salt-softened joints that need repointing, and only then mount the hardware. A correctly sized cap on a sound crown lasts. A good cap on a failing crown doesn’t.
Gelco Models & Products We Service in Santa Monica
We work on the Gelco products that sit on and inside Santa Monica fireplaces: top-mount multi-flue caps in stainless and powder-coated steel, single-flue chimney caps with bolt-on or slip-in mounting, fireplace dampers and damper replacement assemblies, and decorative glass door and screen sets. Each one gets checked against the flue or firebox opening before we recommend a repair.
Parts selection is straightforward. We use genuine Gelco caps, dampers and screens when the original part is the right size for the flue. When a Gelco unit is discontinued or undersized for the tile, we move to a correctly sized quality aftermarket stainless cap rather than forcing something that doesn’t fit. Repairs usually make sense on caps, dampers and door hardware. When a Gelco cap has rusted through at the welds or a damper frame is seized solid, replacement is the honest answer.

See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Santa Monica
Every Gelco job is priced per job by a written estimate, and the estimate is free. What drives the number is what we find: whether the cap just needs re-seating or a full replacement, whether the damper frees up or needs a new assembly, and whether the crown and mortar joints underneath are sound enough to hold new hardware. A multi-flue cap costs more than a single-flue unit because there’s more to mount and more to check.
We don’t quote off a phone description alone. The written estimate sets the final price, and nothing gets recommended without evidence you can see. If a repair can safely wait, we’ll tell you that too. Call (866) 937-7635 for an exact quote.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Santa Monica
No. We’re an independent provider, not affiliated with or authorized by Gelco. That independence is the point. Our recommendations follow what the chimney needs, not what a manufacturer wants moved off a shelf.
Yes, when the original part is the right size for your flue. We use genuine Gelco caps, dampers and screens when they fit correctly, and switch to a correctly sized quality aftermarket stainless cap when a Gelco unit is discontinued or undersized for the tile.
Most Gelco cap and damper jobs are completed in a single visit. A straightforward cap re-seat or damper repair takes a couple of hours; a multi-flue cap replacement on an older chimney takes longer once we’ve checked the crown and mortar joints. We confirm timing when we book.
Top-mount multi-flue caps in stainless and powder-coated steel, single-flue caps with bolt-on or slip-in mounting, fireplace dampers and damper replacement assemblies, and decorative glass door and screen sets. We inspect the flue or firebox opening before recommending any repair.
Yes, a multi-flue cap is the right choice for a two-flue chimney, and Ocean Park Craftsman chimneys often need one. The catch is the crown: original 1920s clay tile crowns in Ocean Park can have hollowed mortar joints from salt air, so we check the masonry before mounting anything. A cap bolted to a soft crown won’t last a windy season. Call (866) 937-7635 for an exact quote – estimates are free.
Service Areas Near Santa Monica
We work on Gelco chimneys across Santa Monica and the surrounding Westside, including Brentwood, Westwood, Beverly Hills, and Pacific Palisades. If your chimney is just over the line in Venice, we cover that too. Same salt air, same sticky creosote, same hardware problems – just a different set of rooftops.
Book Your Gelco Service in Santa Monica Today
If your Gelco cap is pitted, your damper won’t close flush, or you just want an honest read on what’s up there, call (866) 937-7635. Estimates are free, and we’ll tell you plainly when a repair can wait. Call (866) 937-7635. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Brentwood Chimney Sweep.