Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Venice, CA
We provide independent Gelco service across Venice, CA, and the one thing that makes our Gelco work here different is what we look for first: moisture, not creosote. Ocean air and stucco-clad chimneys shape nearly every Gelco cap and damper problem the beach cottages here develop. We’re an independent shop, not affiliated with or authorized by Gelco, and we don’t sell the brand. We clean, inspect, repair and install Gelco equipment using quality parts that fit it. Our technicians have up to 12 years of experience, and every Gelco job in Venice starts with a flat-price scope you agree to before we book. Call (866) 937-7635 for a free estimate.

Why Venice Residents Choose Us for Gelco Service
Southern California chimney work has run on Gelco components for decades, so an independent sweep out here gets real hands-on familiarity with its damper hardware, caps and insert parts without any manufacturer tie. That experience matters in a place like Venice, where the problem is rarely the brand and almost always what the climate has done to it. Read a rusted top-mount cap or a damper stuck half-open the wrong way and you’ll chase the wrong fix.
We only do chimneys. That single-trade focus is why we can tell when a Gelco cap is still sound and worth cleaning versus when salt air has already won and replacement is the honest call. It’s also why we carry the sizes and stainless options that fit a repaired or rebuilt chimney top instead of forcing an old cap back down onto a spalled crown. Scheduling is straightforward: we book a window, agree the sweep price over the phone, and show up with the scope already set so there are no surprises when the cap comes off. Reach us at (866) 937-7635.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Venice
These are the Gelco issues that show up again and again on Venice chimneys, each tied to how the marine air and the local housing stock wear on the equipment.
- Top-mount caps corroding and seizing at the fasteners. Salt-laden air off the ocean eats at steel hardware until removal for inspection turns into a fight, and sometimes a destructive one. A cap that won’t come free without cutting is a routine finding here, not a fluke.
- Dampers rusting and sticking open or shut. In beach-cottage fireplaces used a few times a year, the firebox stays damp and the Gelco damper hardware rusts in place. Stuck shut seals in moisture; stuck open lets it straight into the flue.
- Caps sitting poorly on spalled terracotta flue tile. Gelco caps sized for older single-wythe brick chimneys can leave gaps when the tile crown has spalled after decades of salt exposure, and that gap is where wind-driven rain gets in.
- Wind-driven rain working behind stucco-clad exterior chimneys. On the 1920s cottages with stucco applied over old brick, a poorly seated cap lets water behind the stucco, where mortar failure and rot hide until an inspection opens it up.
- Insert and venting components deteriorating in disused flues. Fireplaces that see little use draw pests and hold moisture rather than creosote, and the gaskets and seals on Gelco fireplace inserts break down quietly in that damp, unused environment.
Gelco Service in Venice: What Local Conditions Mean for Your Equipment
North of Rose Avenue, many of the 1920s cottages have stucco-clad exterior chimneys where the stucco went on over old brick without proper flashing. That detail changes what a Gelco visit actually is. Winter storm rain works behind the stucco instead of shedding off it, and it sits there against mortar and framing that never gets a chance to dry. By the time it shows on the surface, the damage is already underneath.
So a routine Gelco cap and damper check on one of these chimneys turns into a moisture survey. We look at how the cap seats on the flue tile, whether water can get behind the stucco at the top, and whether the mortar under it has softened. The cap is often the first line of defense and the first thing to fail. Get it right and the stucco stays dry. Get it wrong and you’re paying for masonry repair you can’t see coming. That’s the Venice reality a generic Gelco page never mentions, and it’s why we lead with inspection here.
Gelco Models & Products We Service in Venice
We service the Gelco products that actually sit on Venice chimneys: top-mount multi-flue caps in stainless and powder-coated steel, single-flue caps for masonry chimneys, fireplace dampers and damper assemblies, and fireplace inserts with their related venting components. Each one ages differently in this climate, and each one gets checked on its own terms.
When a part fails, we prefer a genuine Gelco replacement where it still fits the existing flue and crown. When OEM sizing no longer matches a repaired or rebuilt chimney top, a quality aftermarket stainless cap is a sound substitute. We’re an independent shop, so our loyalty is to the fit and the material, not to forcing a part that no longer belongs there. Quality parts that fit the flue: that’s the standard.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Venice
Gelco service in Venice is priced per job, and the written estimate you get before booking sets the final number. What drives the cost is what the chimney turns out to need: a straightforward cap and damper check on an accessible chimney sits at the lower end, while a seized cap that has to be freed destructively, a spalled flue tile crown, or moisture damage behind stucco pushes the scope up. A Level 2 inspection, cap replacement and waterproofing are the three add-ons that most often land on a Venice estimate.
Every estimate is free and includes a camera inspection with a photo report you can look at yourself. Nothing gets recommended without evidence you can see. We’ll also tell you plainly when work can safely wait, because a sound cap doesn’t need replacing just because it’s old. For an exact quote on your Gelco chimney, call (866) 937-7635. Estimates are free.
Serving Venice, CA – Our Local Coverage Area
We serve Venice and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Venice
Not usually. A cap replacement is done from the top and fastens to the flue tile or crown, so the stucco stays intact in most cases. We only open stucco when the inspection shows water has already gotten behind it and the mortar underneath needs repointing. Call (866) 937-7635 and we’ll walk you through what your chimney actually needs.
Because infrequent use is the cause. A fireplace that sits unused stays damp from ocean moisture, and the Gelco damper hardware rusts in place. The fix is usually freeing or replacing the damper and getting a cap seated properly so the firebox can dry out. Call (866) 937-7635 for an estimate.
Often not. A Level 1 inspection covers accessible parts only, and an unused fireplace with a rusted cap and a disused flue usually has problems a Level 1 won’t reach, like pests, moisture damage or a spalled tile crown. A Level 2 inspection with a camera is the safer call. Call (866) 937-7635 to book one.
It usually means the cap has gaps or has shifted on a spalled flue tile, so debris and rain are getting past it. It can also mean pests have moved into a disused flue above the damper. Both show up in a camera inspection. Call (866) 937-7635 for an exact quote.
Yes, if the brick and stucco are showing moisture wear. A cap blocks rain from the top, but ocean air still works on the mortar and stucco from the outside, and waterproofing slows that deterioration. We recommend it only when the inspection shows it’s needed. Call (866) 937-7635. Estimates are free.
Service Areas Near Venice
We serve Gelco chimney cleaning across Venice and the surrounding Westside, including Santa Monica, Brentwood, Westwood, Pacific Palisades and Beverly Hills. We also cover the beach communities just north and south, with Gelco service in Marina del Rey and Mar Vista nearby. Wherever you are on the Westside, the same moisture-first approach applies.
Book Your Gelco Service in Venice Today
Gelco chimney cleaning in Venice starts with a call. We’ll inspect the cap, damper and flue, show you the evidence on camera, and give you a written estimate before anything is booked. Call (866) 937-7635 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Learn more about our Gelco work or Venice service.
Written by the team at Brentwood Chimney Sweep.